Icom IC-7610 Скачать руководство пользователя страница 48

Страница: 48 / 101

4. VOICE RECORDER FUNCTIONS

Recording a QSO audio

This transceiver is equipped with a QSO recorder not
only for the receive audio, but also for the transmit
audio.
This function is useful to make a QSO record or

to conirm your QSO with a rare entity’s station or

on a DX’pedition. You can also use the function to

repeatedly send the same message.
The recorded contents are saved onto an SD card.

NOTE:

• To record a QSO, an SD card (user supplied) is required.

• If your SD card does not have an “IC-7610” folder, back

up any data on the SD card, insert it in the transceivers
card slot and then format it using the built-in format
function.

• Once the recording starts, recording will restart after the

transceiver is turned OFF and ON again.

• The recording continues until you touch <<REC Stop>>

or the free space on the SD card has run out.

•

When the recording ile’s content becomes 2 GB, the

transceiver continues to record, but to a new ile.

When the PTT Automatic Recording function,

“PTT Auto REC” is set to

ON in RECORDER SET,

the recording automatically starts when you start
transmitting.

REC

QUICK

MENU

There are 3 ways to start recording.

Hold down

REC

for 1 second.

Push

QUICK

and select “REC Start.”

Push

MENU

and touch [RECORD].

The recorded audio is saved in the “Voice” folder on
the SD card.

TIP: About the icons

• While recording, “

●

” is displayed

under the clock readout and the SD
card indicator next to the SD card
slot blinks blue.

• While pausing, “

〓

” is displayed.

MENU

» RECORD > Recorder Set >

PTT Auto REC

Using the [REC] key

Hold down

REC

for 1 second to start recording.

To stop recording, hold down

REC

for 1 second

again.

You can change the recorder settings on the

RECORDER SET screen (p. 47).

Using the [QUICK] key

1. Push

QUICK

Touch [<<REC Start>>] to start recording.

Using the MENU screen

1. Display the QSO RECORDER screen.

MENU

RECORD

Touch “<<REC Start>>” to start recording.

• “Recording Started” is displayed for 1 second.

3. To stop recording, touch “<<REC Stop>>.”

The “<<REC Stop>> is displayed while recording
instead of “<<REC Start>>.”

4. To close the QSO RECORDER screen,

push

EXIT

Содержание IC-7610






































































































Результаты поиска

Содержание IC-7610

Отзывы:

Похожие инструкции для IC-7610

Бренды по названию

Популярные бренды

Icom IC-7610, Руководство для продвинутых пользователей

Результаты поиска

Содержание IC-7610

Отзывы:

Похожие инструкции для IC-7610

Бренды по названию

Популярные бренды