background image

5. VOICE TX MEMORY OPERATION

50

Recording a Voice TX memory

You can record up to 8 Voice transmit memories 
(T1 ~ T8) of up to one and a half minutes in each 
memory, onto an SD card. To transmit a recorded 
content using a

 Voice TX memory, irst record the 

message, as described below.

L

 A user supplied SD card is required to use the 
Voice TX memory function.

L

 You can also transmit the recorded content using 
an external keypad.

 

D

Recording

1.   Display the VOICE TX screen in the SSB, AM, or 

FM mode.

MENU

 »

VOICE

2.  Touch [REC/SET].

5.   Touch 

 and speak into the microphone 

without holding down [PTT] to start recording.

Information

L

 

•  You can record up to one and a half minutes in 

each memory.

 

• The previously recorded content is overwritten.

6.  Touch 

 to stop recording.

7.   To close the VOICE TX screen, push 

EXIT

 

several times.

TIP: How to clear the recorded content

Touch the Voice memory for 1 second in step 4 to 
display the Quick menu, and then touch “Clear.”

4.   Touch  “

” of the TX memory.  

(Example: T1)

3.  Touch “REC.”

 

•  The VOICE TX RECORD screen is displayed.

Touch to open the MIC 
GAIN adjustment window

Displayed while 
recording

Displays the input 
audio level

Adjust the Mic gain so that the “REC 
Level” meter does not reach 80%

 

D

Playing back

 

z

  On the selected memory’s recording screen, touch 

 to start playing back.

L

To stop the playback, touch 

.

Displayed while playing back

Содержание IC-7610






































































































Отзывы: