Icom IC-7610 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 101

background image

10. ANTENNA TUNER OPERATION (ADVANCED)

76

Antenna switching setting when operating with Dualwatch

You can connect a Transmit/Receive antenna to
either ANT1 or ANT2 for the normal operation.
However, if you want to use separate antennas for
transmit and receive you need to set “RX-ANT,” or if

you want to add an external device, such as a ilter/

pre-ampliire for receive you need to set

“RX-I/O.”

To change the RX-ANT Connectors Type, touch
[TYPE] on the ANTENNA screen, then select
between “Connect Receive Antenna” and “Connect
External RX Device.”

“RX-I/O” is set to both the Main and Sub bands.

If you turn OFF RX-I/O on the Sub band that was
forcibly set by above operation, RX-I/O on the Main
band is also forcibly turned OFF, and

is displayed.

RX-I/O is OFF.

RX-I/O is forcibly
cleared.

(Example: Main band=ANT1, Sub band=ANT2)
When the Main (ANT1) and Sub (ANT2) bands are
set to different antennas, if you set RX-I/O to the Main
band, and then you set RX-I/O to the Sub band, the
previous Main band setting is forcibly cleared, and

is displayed. Setting Main back to RX-/IO SUB is

forcibly cleared, and

is displayed.

RX-I/O is set to ANT1.

ANT2 is selected.

RX-I/O is set to ANT2

RX-I/O is set.

RX-I/O is forcibly
turned OFF.

The Main and Sub bands are not forcibly set or
cleared when the RX-ANT Connectors Type is set to
“Connect Receive Antenna.”

If you switch the RX-ANT Connectors Type to the
opposite type, (to “Connect External RX Device” or to
“Connect Receive Antenna”) the previous RX-ANT (or
RX-I/O) memory settings for both the Main and Sub
bands are cleared.

The “RX-I/O” settings are limited according to the
antenna connector setting (ANT1 or ANT2), as
follows.

Example:

When both the Main and Sub bands are using the
same antenna (Example: ANT1) and the RX-ANT
Connectors Type is set to “Connect External RX
Device,” if the Main is set to RX-I/O, the Sub RX-I/O
is forcibly set (temporarily) the same as the Main
setting. Turning OFF the RX-I/O on the Sub band
clears the RX-I/O settings for both the Sub and the
Main bands.

MENU

» ANTENNA >

TYPE

«
...
80
81
82
83
84
...
»

Содержание IC-7610






































































































Отзывы:

Нет отзывов

Похожие инструкции для IC-7610

Masoneilan 8000

Бренд: Baker Hughes Страницы: 24

Бренд: MAMAC SYSTEMS Страницы: 2

Freeview ZMX-7500

Бренд: Zinwell Страницы: 13

Бренд: aci Страницы: 8

Бренд: aci Страницы: 4

Бренд: Harman Kardon Страницы: 8

Бренд: OrangeRx Страницы: 2

Бренд: dikom Страницы: 21

Бренд: FUTABA Страницы: 22

Бренд: Zaxcom Страницы: 30

Campersat Autoseek Autoskew System 4441

Бренд: Campersat Страницы: 14

Бренд: SMD Страницы: 4

Бренд: Vaisala Страницы: 20

Бренд: PCB Piezotronics Страницы: 6

Бренд: Boss Audio Systems Страницы: 23

Бренд: Sena Страницы: 27

Бренд: Redback Страницы: 4

ATTEROTECH unBT2A

Бренд: QSC Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды