Icom IC-400PRO Скачать руководство пользователя страница 39

Страница: 39 / 48

PROGRAMMABLE FUNCTION KEYS

The following functions can be assigned to

[MONI], [SCN],

[DUP], [

], [

]

and

[

]

programmable function keys with

the optional CS-400PRO

CLONING SOFTWARE

In the following explanations, programmable function names
are bracketed. The specific switch used to activate the func-
tion depends on programming.

CH UP AND DOWN KEYS

➥

In standby condition, push to select an operating channel.

➥

After pushing

[BANK/FUNC]

, push to select the desired

channel bank.

*The private channels are set in the channel bank 2 to 8. Select

the desired channel bank before operating the private mode.

BANK/FUNC KEY

➥

Push to enter channel bank selection mode.

• In channel bank selection mode, push

[

]

[

]

to select the

desired channel bank.

➥

Push for 1 sec. to toggle Function mode, Set mode or
Normal mode.

• Returns to the Normal mode automatically after 30 sec. when no

key operations are performed in Function or Set mode.

NOTE:

This key should be assigned to Normal/Function

mode respectively to change the key mode.

SCAN START/STOP KEY

➥

Push to start or stop the scan.

➥

Push and hold to enter the scan type selection mode.

• Push

[CH Up]

[CH Down]

to select the desired scan type.

➥

In scan type selection mode, push to set the channel as a
tag channel.

• “

” appears for tag channels.

NOTE:

Place the microphone on hook to start scanning.

Take the microphone off hook to stop scanning.

MR-CH 1/2/3/4

(Private bank only)

Push to select the operating channels 1 to 4 directly.

OUTPUT POWER SELECTION KEYS

Select the transmit output power temporarily, or permanently,
depending on the pre-setting.

• See the help file of the optional CS-400PRO

CLONING SOFTWARE

for

the output power level for each selection.

Normal mode

Set mode

Function mode

Push

[

]

for 1 sec.

IC-400PRO.qxd 03.6.19 6:13 PM Page 34 (1,1)

Содержание IC-400PRO

















































Результаты поиска

Содержание IC-400PRO

Отзывы:

Похожие инструкции для IC-400PRO

Бренды по названию

Популярные бренды

Icom IC-400PRO, Инструкция по эксплуатации

Результаты поиска

Содержание IC-400PRO

Отзывы:

Похожие инструкции для IC-400PRO

Бренды по названию

Популярные бренды