Icom FP-561, Инструкция по эксплуатации

Страница: 25 / 84

22
3
r
PLOTTER MODE
q
ROUTE REGISTRATION AND EDIT
(3)-2 Clearing a route The procedure of clearing a route is as follows.
q
Press the [MENU] key.
The Main Menu screen will appear.
w
Select “Plotter Menu” using the [UP] or [DOWN] key and press the [SET] key.
The Plotter Menu screen will appear.
e
Select “Route Enter/Edit” using the [UP] or [DOWN] key and press the [SET] key.
The Route Enter/Edit screen will appear.
r
Select “ERS” (erase) or “ERSALL” (erase all) using the [LEFT] or [RIGHT] key
and press the [SET] key.
When you select “ERS”, route No. 1 will be highlighted in yellow.
* When you select “ERSALL”, proceed with step
i
below.
t
Using the [UP] or [DOWN] key, select the route No. you want to clear.
* Pressing the [RIGHT] key permits you to go to the next page (route Nos. 11–20)
of the Route Enter/Edit screen. To return to the previous page (route Nos.
1–10), press the [LEFT] key.
y
Press the [SET] key.
A message will appear at the bottom of the screen, indicating the route No. you
selected is going to be cleared.
u
Press the [SET] key again to clear the route.
i
When you select “ERSALL” in step
r
above:
Press the [SET] key.
A message will appear at the bottom of the screen, indicating all the registered
routes are going to be cleared.
o
Press the [SET] key again to clear all the routes.
GPS 34ﾟ 18. 000N 135ﾟ 01. 000E
5
Select ERS and press the
[SET] key.
Select the route No. you want
to clear and press the [SET] key. Press the [SET] key, and the
selected route is cleared.
¡ Route Enter/Edit screen
GPS 34ﾟ 18. 000N 135ﾟ 01. 000E
5
¡ Selecting a route No.
GPS 34ﾟ 18. 000N 135ﾟ 01. 000E
5
¡ Clearing the route
CLR
ENT
SET
BACK
SEL
80.0FT
ROUTE ENTER/EDIT
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
ENTER/EDIT ERS ERSALL
CLR
SET
SET
CANC
SEL PAGE
80.0FT
ROUTE ENTER/EDIT
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
ENTER/EDIT ERS ERSALL
CLR
OK
SET
CANC
80.0FT
ROUTE ENTER/EDIT
NO.
1 ROUTE 1
2
3
4
5
6
7
8
9
10
ERASE ROUTE 1 ?
CLR
OK
SET
CANC
80.0FT
ERASE ALL ROUTES ?
80.0FT
Select ERSALL and press the
[SET] key. Press the [SET] key, and all
the routes are cleared.
¡ Selecting all routes ¡
Clearing all routes
CLR
ENT
SET
BACK
SEL
ENTER/EDIT ERS ERSALL