background image

TITAN HD USER MANUAL

9

Annual calibration to the thermal camera is recommended. Contact customer 

service to schedule maintenance.

2-2     Accuracy

For very accurate results, we recommend that you wait a minimum of 5 minutes 

after you have started the camera before measuring a temperature.

2-1     Calibration

2.

User Notice

2-4

     Disposal of Electronic Waste 

Electrical and electronic equipment (EEE) contains materials, components and 

substances that may be hazardous and present a risk to human health and 

the environment when waste electrical and electronic equipment (WEEE) is not 

handled correctly.

Equipment marked with the below crossed-out wheeled bin is electrical and 

electronic equipment. The crossed-out wheeled bin symbol indicates that 

waste electrical and electronic equipment should not be discarded together 

with unseparated household waste, but must be collected separately.

All local authorities have established collection schemes under which residents 

can dispose of equipment at a recycling center or other collection points, or 

WEEE will be collected directly from households. More detailed information is 

available from the administration of the relevant local authority. 

Always dispose 

of waste in accordance with local, state, and federal regulations.

2-3

     Cybersecurity

After the products are connected to the Internet, they may face risks including 

but not limited to network attacks, hacker attacks, virus infections, etc. The 

company will not be responsible for the abnormal operation of the products and 

any loss or liability caused therefrom shall be at your own risk.

Содержание TITAN HD




































































































Отзывы: