ICI TITAN HD, Руководство пользователя

Страница: 59 / 99

TITAN HD USER MANUAL
59
USERS CAN ALSO CHANGE THE ALARM SETTINGS BY VISITING THE ALARM
SETTINGS TAB OF THE SETTINGS MENU.
ALARMS CANNOT BE ENABLED FOR THE CENTER POINT.
MAXIMUM TEMPERATURE, MINIMUM TEMPERATURE, AND DELTA T ALARMS
CAN BE ENABLED INDIVIDUALLY OR AS A GROUP, BUT THE USER WILL NEED
TO ADJUST THE SETTINGS OF THE TEMPERATURE ALARMS INDIVIDUALLY.
8-18 Alarm Settings
Alarms let users know when a temperature measurement is above, below or
beyond a set threshold. Analysis objects with temperature readings that exceed
the threshold settings may flash or produce an audible tone depending on user
settings. This is useful for detecting abnormal temperatures which may lead to
costly repairs or shut downs.
8-18-1 Enable/Disable Alarms
By default the imager alarm thresholds for each analysis object is disabled. The
user has the ability to enable each analysis object alarm individually.
Enable alarms as follows:
1. Using the touch screen, tap an existing temperature analysis object to select
it. Object is highlighted red when selected and a Pop-up Menu appears.
2. Tap the Alarm Settings icon:
3. Toggle an alarm to the On position by tapping its switch. The switch turns
red when active. Disable the alarm by tapping the switch again. Switch
turns gray when inactive. Options for analysis object appear: Maximum
Temperature, Minimum Temperature, and Delta T.
4. Tap an alarm to enable it. A green ✓ appears next to an active alarm. Tap
the green ✓ again to disable the alarm. Alarm is gray when inactive.
5. Tap ✓ to save changes. Tap X to cancel changes. The window closes.
2.
4.
3.