ICI TITAN HD, Руководство пользователя

Страница: 57 / 99

TITAN HD USER MANUAL
57
8-17-1-12 Hot/Cold Point Trackers
Hot and cold spot trackers are enabled by default and cannot be disabled. Hot
spot tracking identifies the hottest point in the scene whereas cold spot tracking
to identify the coldest point in the scene.
8-17-1-11 Center Point Temperature Measurement
The center point measurement is enabled by default and is locked to the center
of the scene. Radiometric temperature information contained in this region is
displayed above the region of interest and in the upper left corner of the screen.
Users can disable the center point and remove the temperature information from
the user interface.
Enable/disable center point temperature measurement as follows:
1. Using the touchscreen, tap the settings icon to open the Settings Menu.
2. Tap the Analysis Settings tab.
3. Under Full Frame, toggle Center to the On position by tapping the switch
next to the option. The switch turns red when active. Disable the option by
tapping the switch again. Switch turns gray when inactive.
4. Use the switches to choose whether or not to display the maximum,
minimum, and delta T (temperature difference) in the upper left corner of
the Image Display Window by enabling/disabling the other switches. The
minimum and maximum temperatures are displayed above the region of
interest by default and can only be disabled if the center point is disabled.
5. Press the Back button continuously to exit the Settings Menu.
2.
4.
3.
5.
THE CENTER POINT MEASUREMENT IS LOCKED TO THE CENTER OF THE
SCREEN AND CANNOT BE MOVED. THE HOT AND COLD POINT TRACKERS WILL
MOVE FREELY AROUND THE SCREEN AS TEMPERATURES ARE MEASURED
AND CANNOT BE LOCKED INTO A STATIONARY POSITION.