icetro IM-0350-AC, Руководство пользователя

Страница: 36 / 44

36
We Think of Customer Satisfactio
n
Disassembling Parts for Washing and Disinfection
8. Maintenance, Repair, and Disinfection
③
①
②
④
⑤
1. Disassembly of Water Curtain
① Hold the bottom side of the water curtain with both hands,
slightly pull to the front, and push upward to remove.
2. Disassembly of Ice Thickness Sensor
① Press both hinges on the top side of the ice thickness sensor
and pull to the front to remove.
② To remove ice thickness sensor and wiring from the ice making
chamber, remove the top cover of the ice making chamber
and remove the connector connected to the electronic unit.
3. Disassembly of Water Vessel
① Twist bot hands and pull both projections on the front side
of the water vessel.
② When the projections on both sides are released
from the grooves, hold the front side of the water vessel
with hands, pull to the front side slightly, pull downward
to remove in a way that the stop bumps(three) on the back
side would be released.
※ Caution: When removing or inserting the water vessel, ensure it does
not interrupt water level sensor and water pump.
4. Disassembly of Water Level Sensor
① Hold the water level sensor's body and pull downward
until the connector appears.
② Separate connector and remove from the bottom of the product.
※ Caution: Ensure that the water in the location does not
come onto the connector.
5. Disassembly of Water Distributor
① Press the clamp on both wings of the water distributor
inward and pull it toward the front to remove.
② Loosen the screws that connect the body and the cover
to disassemble.
6. Remove Air Filter
① Pull the handle of the air filter to the front and remove to the side.
⑥