icetro IM-0350-AC, Руководство пользователя

Страница: 23 / 44

23
Installing the ice maker and connecting storage bin
1. Use the lifting device to put the ice maker on top
of the bin. Otherwise, at least 2 to 3 persons must
work together to put the ice maker on the bin.
2. As the first phase, put the ice maker on a loading latform.
(Height of loading platform: Minimum of 1m(39.4")
is recommended)
3. As the second phase, move the ice maker from the platform to the
top of the bin.
◆ Be sure to apply more power to the right part of the ice
maker since it is heavier due to the compressor therein.
Loading part
P ro d u c t
(body)
4. Move the main unit of the ice maker on the top backward little
by little until the bin and the front door would open safely.
(Align back and side.)
5. Fix the main unit using the fixture or the fixing bracket on the rear
side of the main unit so that the main unit would not fall.
(The fixing bracket is supplied separately upon customer's request.)
6. Slightly loosen three screws on the back left side of the main unit, assemble the windbreak
temporarily, and tighten the screws to fix.
(For air-cooled type, you need to install the enclosed windbreak as indicated in the picture
to block the hot air from the side panel to improve ice-making.) - for some models only