icetro IM-0350-AC, Руководство пользователя

Страница: 31 / 44

31
1. After the harvest cycle ends, adjust the thickness between ice cubes in the bin.
(Attention: When checking the size of ice, make sure the water curtain is mounted
on the ice making chamber so that the ice would not be dispersed
in the condenser's harvest cycle.)
2. The standard distance between the thickness detection unit and evaporator
is 6~8mm. (Refer to the following picture)
- If you wish to make thicker ice, turn the adjustment screw clockwise (CW).
- If you wish to make thinner ice, turn the adjustment screw counterclockwise (CCW).
(Caution: Condenser may be overcooled. Make adjustments carefully.)
Ice Thickness Measuring Unit
Ice Thickness
Adjusting Screw
Adjusting Ice Thickness
OFF
1. Place the power switch on the panel parts in the
'Middle (OFF)' to stop the machine.
◆ When you place the power switch from 'ICE' → 'OFF', the machine will stop after
ice making / harvest completes.
◆ When you place the power switch from 'WASH' → 'OFF', the machine will stop
after the washing cycle ends
0.23~0.31 inch
ICE
OFF
WASH