Ice SCRUB 50 Скачать руководство пользователя

Страница: 19 / 60

PREP

ARING THE

APPLIANCE

PREPARING THE APPLIANCE

HANDLING THE PACKED APPLIANCE

Since the packaging elements (plastic bags, staples, etc.) are a

potential source of danger, they should not be left within the reach of

children, disabled persons, etc.

Gross weight of device, including packaging, is:

HOW TO UNPACK THE APPLIANCE (versions without PM)

The appliance is contained in specific packaging, to remove the

appliance do as follows:

1. Place the lower part of the outer packaging in contact with the

floor.

ATTENTION:

use the pictograms printed on the box as

reference.

2. Remove the outer package.

ATTENTION:

these operations must be carried out using

protective gloves to avoid any possible contact with the edges

or tips of metal objects.

3. Raise the brush head unit and press the brush head control pedal

(1) (on the rear of the device) downwards (

Fig.1

4. Raise the squeegee unit and turn the squeegee control lever (2)

in the direction of the arrow in (

Fig.2

). The lever is located on the

back of the device.

The device is fixed to the pallet by means of wedges (3) that block

the wheels and brush head (

Fig.3

). Remove the wedges.

6. For traction versions, release the electronic brake and turn the

lever (4) in the direction of the arrow. The traction gearmotor is

located on the left side of the device (

Fig.4

7. Using a chute, bring the device down from the pallet, pushing

it backwards.

ATTENTION:

Do not fit the brush and the rear squeegee unit

before unloading the device, and avoid any violent jolts to the

brush head and the squeegee support.

ATTENTION:

during the operation to move it by pushing, the

electric brake should not be engaged. The device will anyway

have safety braking, once a set critical speed has been

exceeded the internal braking system of the chopper circuit

board will activate automatically.

ATTENTION:

it is recommended that all the packaging

components be kept for any future transportation of the

appliance.

ATTENTION:

move the packaged product with handling

equipment that complies with legal requirements regarding

size and mass of the packaging.

U/M SCRUB 50

D-O

SCRUB

50C - 55D -

65D

610

730

1250

1330

1135

1220

SCRUB

50D

SCRUB

50O

SCRUB

50C

SCRUB

55D

SCRUB

65D

95kg

105

100

112

115

Содержание SCRUB 50





























































Результаты поиска

Содержание SCRUB 50

Отзывы:

Похожие инструкции для SCRUB 50

Бренды по названию

Популярные бренды

Ice SCRUB 50, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание SCRUB 50

Отзывы:

Похожие инструкции для SCRUB 50

Бренды по названию

Популярные бренды