4-4 Using the Tools Page
Rev AA
Printhead Setting in Intermittent Mode
Touch the Printhead button on the setup page to access the printhead
parameters.
The Printhead page in intermittent mode allows you to access the
following parameters:
• Horizontal Registration: The position of the print in the printers
overall printing window, measured in mm across the width of the
printhead. It enables you to position the print along the width of the
printhead.
• Vertical Registration: The position of the print in the printers overall
print window, measured in mm in the direction perpendicular to the
printhead.
• Print Orientation: Allows rotation of the whole image through 180
degrees
• Print Delay: The delay between the print signal and the commencing
of the print. Measured in milliseconds, it allows time for the
packaging film to come to a complete rest before the printhead comes
in contact. It should be set to the smallest possible value that gives a
good quality print.
• Print Speed: The target printing speed of the head in mm/sec. It
should be set to the lowest speed that allows completion of the print
in the available dwell time of the packaging film
Figure 4-4: Printhead Parameters in Intermittent Mode
ICE
P
egasus
Service Manual
