36
will be the raw value as maintained internally to the drive).
The factory default values of parameters
Ext Comm Cfg #5
and
Ext Comm Cfg #6
are 0, which means “not designated”. When
these drive parameters are “not designated”, their corresponding
subpoint values will always be 0.
#12 ....... Refer to the explanation for #11 above. The data accessed via this
object is defined by the decimal ASD parameter value entered into
Ext Comm Cfg #6
.
10.5.2
LDI Subpoints
#13 ....... Indicates whether the drive is running or stopped. ASD parameter
FE01, bit #10.
#14 ....... Indicates whether the drive is running in the forward or reverse
direction. ASD parameter FE01, bit #9.
#15 ....... Indicates whether or not the drive is currently faulted.
#16 ....... Indicates the status of the “F” programmable input terminal. ASD
parameter FE06, bit #0.
#17 ....... Indicates the status of the “R” programmable input terminal. ASD
parameter FE06, bit #1.
#18 ....... Indicates the status of the “ST” programmable input terminal. ASD
parameter FE06, bit #2.
#19 ....... Indicates the status of the “RES” programmable input terminal. ASD
parameter FE06, bit #3.
#21 ....... Indicates the status of the “S1” programmable input terminal. ASD
parameter FE06, bit #4.
#22 ....... Indicates the status of the “S2” programmable input terminal. ASD
parameter FE06, bit #5.
#23 ....... Indicates the status of the “S3” programmable input terminal. ASD
parameter FE06, bit #6.
#24 ....... Indicates the status of the “S4” programmable input terminal. ASD
parameter FE06, bit #7.
#25 ....... Indicates the status of the “OUT1” programmable output terminal.
ASD parameter FE07, bit #0.
#26 ....... Indicates the status of the “OUT2” programmable output terminal.
ASD parameter FE07, bit #1.
#27 ....... Indicates the status of the “FL” programmable output terminal. ASD
parameter FE07, bit #2.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: [email protected]
