PIKAMANUAALI
KIINTEÄN TAI AUTOMAATTISEN TEHOKERTOIMEN KORJAUSLAITTEEN
KÄYTTÖÖNOTTO
ICAR-yksikköjen oikeaoppiseen käyttöönottoon liittyvät toimenpiteet on kuvattu alla.
1.
LIITTÄMINEN VERKKOVIRTAAN
Liitä kolme verkkovirran vaihejohdinta liittymiin, jotka on merkitty numeroilla 1-2-3 tai kirjaimilla R-S-T (L1-L2-L3). Kiinnitä erityistä huomiota
virtajohdon mitoitukseen liitettäessä se tehokertoimen korjausjärjestelmään ja muihin käyttö- ja/tai suojalaitteisiin, sillä sen tulee kestää
kondensaattorikeskuksen nimellisteho puolitoistakertaisena.
2.
LIITTÄMINEN MAADOITUSJOHTOON
Liitä maadoitusjohto yksikön vastaavaan liitäntään. Maadoitusjohdon koon tulee vastata vähintään 60 % vaihejohtimen koosta (esim. vaihejohdin,
koko 120mm
2
– maadoitusjohto, koko vähintään 72mm
2
).
Kun yllä kuvatut toiminnot on suoritettu, käynnistä yksikkö. Ei-automaattisten yksiköiden osalta käyttöönotto on nyt suoritettu loppuun.
Seuraavat toimenpiteet tulee suorittaa ainoastaan automaattisilla tehokertoimen korjausyksiköillä.
Huomaathan, että virtamuuntajan ensisijaista arvoa lukuun ottamatta kaikki käyttöparametrit on määritelty tehtaalla. Mikäli haluat muuttaa muita
arvoja, tutustu laitteen mukana tulevan loistehosäätimen ohjekirjaan (ladattavissa myös osoitteessa
) tai ota yhteyttä ICARin
tekniseen tukeen.
3.
LOISTEHOSÄÄTIMEN ESIASENNUS
Säädin RPC 5LSA-7LSA-8BSA-12BSA
:
relelähdössä asiaankuuluvalla näytöllä vilkkuu ilmoitus ”CT”. Paina sen jälkeen +-painiketta ja syötä
virtamuuntajan ensisijainen virta. Kun arvo on asetettu, paina MAN/AUTO-painiketta vahvistaaksesi asetuksen.
Säädin RPA 8BMA-12BMA
:
katso säädin RPC.
Säädin RPE 12BTA
:
katso säädin RPC.
Säädin RPC 8BGA:
Etupuolen kuvaus
Navigointipainikkeet
Vahvistuspainike
Hälytysvalo
Optinen WIFI- ja
USB-liitäntä
FI