Icar RPC 8BGA, Руководство по эксплуатации

Страница: 25 / 40

s. 25 / 40
P21.n.06 Unit of measurement Usr Umn (Text – 6 characters)
P21.n.07 Reset source Usr OFF OFF-ON-INPx-OUTx-LIMx-REMx
P21.n.08 Channel number (x) Usr 1 1-8
For more information download the complete manual of the RPC 8BGA power factor controller from the web site www.icar.com download area concerning the low voltage power
factor correction systems.
M22 – ANALOG INPUTS (AINn,n=1..4) Psw
(M15)
UoM Default Range
P22.n.01 Input type Usr OFF OFF
0..20mA
4….20mA
0…10V
-5V…+5V
PT100
P22.n.02 Start of scale value Usr 0 -9999 - +9999
P22.n.03 Multiplier Usr x1 /100 – x1k
P22.n.04 End of scale value Usr 100 -9999 - +9999
P22.n.05 Multiplier Usr x1 /100 – x1k
P22.n.06 Description Usr AINn (Testo – 16 caratteri)
P22.n.07 Unit of measurement Usr UMn (Testo – 6 caratteri)
For more information download the complete manual of the RPC 8BGA power factor controller from the web site www.icar.com download area concerning the low voltage power
factor correction systems.
M23 – ANALOG OUTPUTS (AOUn,n=1..4) Psw
(M15)
UoM Default Range
P23.n.01 Output type Usr OFF OFF
0..20mA
4….20mA
0…10V
-5V…+5V
P23.n.02 Reference measurement Usr OFF OFF- (misure)
P23.n.03 Channel number (x) Usr 1 OFF / 1-99
P23.n.04
Start of scale value Usr 0 -9999 - +9999
P23.n.05 Multiplier Usr x1 /100 – x10k
P23.n.06 End of scale value Usr 0 -9999 - +9999
P23.n.07 Multiplier Usr x1 /100 – x10k
Note: this menu is divided into 4 sections for the analog outputs AOU1...AOU4
available with OUT 2AN expansion modules
P23.n.01 - Specifies the type of output analog signal. The sensor should be connected to the appropriate terminal on the basis of the type selected. See analog output module manual.
P23.n.02 - Measurement on which the analog output value depends.
P23.n.03
– If the reference measurement is an internal multichannel measurement (AINx for example), the channel is defined.
P23.n.04 and P23.n.05 - Define the value of the measurement that corresponds to a min. output value in the range (0mA, 4mA, 0V, -5V, etc.).
P23.n.06 and P23.n.07 - Define the value of the measurement that corresponds to a max. value in the range (20ma, 10V, +5V, etc.).
Application example: The analog output AOU2 must emit a 0..20mA signal proportional to tha total active power, form 0 to 500kW.
So, we must program section 2 of this menu, that is referred to AOU2.
P23.2.01 = 0…20mA
P23.2.02 = kW tot
P23.2.03 = 1 (not used)
P23.2.04 = 0
P23.2.05 = x1
P23.2.06 = 500
P23.2.07 = x1k
M24 – PULSES
(PULn, n=1…6) Psw
(M15)
UoM Default Range
P24.n.01 Pulse source Usr OFF OFF-Kwh-kvar-kVA
P24.n.02
Counting unit Usr 100 10/100/1k/10k
P24.n.03 Pulse duration Usr s 0.1 0.1-1.00
For more information download the complete manual of the RPC 8BGA power factor controller from the web site www.icar.com download area concerning the low voltage power
factor correction systems.
M25 – USER ALARMS
(UAn, n=1…8) Psw
(M15)
UoM Default Range
P25.n.01 Alarm source Usr OFF OFF-INPx-OUTx-LIMx-REMx
P25.n.02
Channel number (x) Usr 1 1-8
P25.n.03 Text Usr UAn (testo – 20 char)
For more information download the complete manual of the RPC 8BGA power factor controller from the web site www.icar.com download area concerning the low voltage power
factor correction systems.
M26 – ALARM PROPERTIES
(ALAn, n=1…xxxx) Psw
(M15)
Default Range
P26.n.01 Alarm enable Adv (see table) OFF – ON
P26.n.02
Retnitive Adv (see table) OFF - RIT
P26.n.03 Operating mode Adv (see table) AUT-MAN
AUT
P26.n.04 Global alarm 1 Adv (see table) OFF – GLB1
P26.n.05 Global alarm 2 Adv (see table) OFF – GLB2
P26.n.06 Global alarm 3 Adv (see table) OFF – GLB3
P26.n.07 Step disconnection Adv (see table) OFF
IMMEDIATE
SLOW
P26.n.08 Slave disconnection mode Adv (see table) GENERAL - LOCAL
P26.n.09
Inhibition from input Adv (see table) OFF - ON
P26.n.10 Modem call Adv (see table) OFF - MDM
P26.n.11 Not shown on LCD Adv (see table) OFF - NOLCD
P26.n.12 Alarm delay Adv (see table) OFF/ 1-120
P26.n.13 Delay UoM Adv (see table) MIN-SEC