IC Bus BE Series, Руководство по эксплуатации и обслуживанию

Страница: 74 / 239

Driver Controls
Before driving the bus, check the mirror adjustment. The mirrors
enhance visibility and assist safe vehicle operation. Make sure
you can see the entire front of the bus using the cross view
mirrors. Use the rear view mirrors to see both sides of the bus,
and at least four bus lengths behind the bus. Use the following
steps to adjust the mirrors before you operate the bus.
1. Adjust the driver’s seat to the desired position, and
observe the view through all outside mirrors to enhance
visibility in all directions
2. Look through the right flat driving mirror and make sure
that the top of the side windows are visible in the upper
edge of the mirror, and that the right side of the bus body
is visible in the inside edge of the right flat mirror.
3. Look through the right convex driving mirror and make
sure that the view in the top of the convex mirror overlaps
the view covered by the right hand flat driving mirror, and
that the right side of the bus body is visible in the inside
edge of the right hand convex mirror.
4. Look through the left flat driving mirror and the left
convex driving mirror and observe that the views are
the same as described for the right mirrors. Refer to
Steps 2 and 3.
5. Look through and adjust the cross view mirrors to make
sure that there is complete visibility around both sides
and the front of the bus
62