IC Bus BE Series, Руководство по эксплуатации и обслуживанию

Страница: 157 / 239

Roadside Emergencies
4. Eye protection should be worn if available. If not
available, shield eyes when near either vehicle’s
batteries.
5. Make sure the vehicle bodies or bumpers are not
touching.
6. Connect one end of the first jumper cable to positive (+)
terminal of the dead battery or (+) terminal of jump start
stud and then the other end to the positive (+) terminal
of the booster battery.
7. Connect one end of the second jumper cable to negative
(-) terminal of the booster battery and the other end to
chassis frame of the vehicle with the discharged battery.
Do not attach the other end to the negative (-) battery
terminal of the discharged battery, because a spark
could occur and cause explosion of gases normally
present around the battery.
8. Reverse above procedure when removing the jumper
cables.
Towing Instructions
WARNING
To prevent property damage, personal injury,
and / or death: always install wheel chocks when
manually releasing the spring brakes. For towing
make sure the vehicle is securely connected
to the tow vehicle and the tow vehicle parking
brakes are applied before releasing the disabled
vehicles parking brakes.
• Always install wheel chocks when manually releasing
the parking brakes, or the vehicle can roll.
• For towing, make sure the vehicle is securely connected
to tow vehicle and tow vehicle parking brakes are
applied before releasing the disabled vehicle’s parking
brakes.
• To ensure release of parking brake, always cage the
spring in the brake chamber.
• Under no circumstances should the spring brake
chamber be disassembled for the purpose of releasing
the parking brake.
145