IC Bus BE Series, Руководство по эксплуатации и обслуживанию

Страница: 72 / 239

Driver Controls
Cruise Control
Operation
WARNING
To prevent property damage, personal injury,
and / or death, do not use the cruise control
system when unpredictable driving conditions
are present.
Such conditions include heavy
traffic and / or roads that are winding, icy, snow
covered, slippery, wet, or with a loose surface.
These conditions may cause wheel slippage and
loss of vehicle control.
NOTE: The right console switch panel is the standard
location for the cruise control switches. These switches
may be located on the steering wheel as an available option,
moving the entry door controls and pupil warning indicator
to the right console switch panel.
The electronic engine vehicle speed controls are activated by
the switches located on the console switch panel.
The left ON / OFF switch turns the control feature on or off.
The right switch (SET / COAST — RESUME / ACCEL) sets and
controls the engine speed.
1. Press the ON position on the ON / OFF rocker switch to
activate the cruise control feature.
2. Press the SET position on the rocker switch after
reaching a speed of at least 56 km/h (35 mph) to set
the cruise speed.
3. Push and hold the RESUME / ACCEL to increase your
set speed, or the SET / COAST to decrease your set
speed.
4. A slight tap on the brake pedal deactivates the cruise.
To return to this speed, press the RESUME / ACCEL
position switch.
5. Push the OFF position on the switch to cancel the
previous speed setting. The previous speed setting is
also cancelled when the vehicle is turned off.
Mirror Adjustment
WARNING
To prevent property damage, personal injury, and
/ or death, use patience and always check the
overall field of vision when unloading, as some
children could be outside the field of vision. Do
not move your bus until you have confirmed the
location of every child and confirmed that they
are clear.
WARNING
To prevent property damage, personal injury,
and / or death, mirrors are not a substitute for
exercising care in operating the vehicle. Mirrors
must be properly adjusted for each driver and
the driver must be aware of the limitations on the
viewing area that exists even when the mirrors
are properly used.
60