IBM totalstorage 200, Руководство по обслуживанию

Страница: 41 / 180

Table 5. Diagnostic error codes (continued)
Error Code Meaning Suspected Part/Suggested Actions
217-XXX-003 Failed BIOS Hard Disk test
Note: If RAID is configured,
the hard disk number refers
to the RAID logical array.
Suspected part: Hard Disk 4
217-XXX-004 Failed BIOS Hard Disk test
Note: If RAID is configured,
the hard disk number refers
to the RAID logical array.
Suspected part: Hard Disk 5
264-XXX-0NN Failed Tape Drive test Suspected part:
1. Tape Cartridge, if user executed the Read/Write Tape Drive
test (XXX = 256)
2. SCSI or Power Cable connected to tape drive with SCSI ID
NN .
3. Tape Drive with SCSI ID NN (Refer to the Help and Service
Information appendix of the tape drive’s user guide).
4. System Board or SCSI Controller (Run SCSI Controller
Diagnostic to determine if the SCSI bus is functioning
properly.)
264-XXX-999 Errors on multiple tape drives Suggested action: See error messages/text in the PC Doctor
error log for detailed information on each individual tape drive
error.
301-XXX-000 Failed Keyboard test Suspected part: Keyboard
405-XXX-000 Failed Ethernet test on
controller on the System
Board Suspected part: System Board
Suggested action: Verify that Ethernet is not disabled in BIOS
405-XXX-00N Failed Ethernet test on
adapter in PCI slot N Suspected part:
1. Adapter in PCI slot N .
2. System Board
415-XXX-000 Failed Modem test Suspected part:
1. Cable
2. Modem
Note: Ensure that the modem is present and attached to
appliance.
3. System Board
Chapter 3. Symptom-to-part index
25