IBM totalstorage 200, Руководство по обслуживанию

Страница: 24 / 180

Diagnostic error messages indicate that a problem exists; they are not intended for
use in identifying a failing part.
Sometimes the first error to occur causes additional errors. In this case, the
appliance displays more than one error message. Always follow the suggested
action instructions for the
first error message that appears.
Error code format
The error code format is as follows:
fff-ttt-iii-date-cc-text message
where:
fff is the three-digit function code that indicates the function being tested when
the error occurred. For example, function code 089 is for the
microprocessor.
ttt is the three-digit failure code that indicates the exact test failure that was
encountered.
iii is the three-digit device ID.
date is the date when the diagnostic test was run and the error recorded.
cc is the check digit that is used to verify the validity of the information.
text message
is the diagnostic message that indicates the reason for the problem.
Text messages
The diagnostic text message format is as follows:
Function Name: Result (test-specific string)
where:
Function Name
is the name of the function being tested when the error occurred. This
corresponds to the function code (fff) given in the previous list.
Result can have one of the following values:
Passed: The diagnostic test completed without any errors.
Failed: The diagnostic test discovered an error.
User Aborted: You stopped the diagnostic test before it was complete.
Not Applicable: You specified a diagnostic test for a device that is not
present.
Aborted: The test could not proceed because of the system configuration.
Warning: A possible problem was reported during the diagnostic test, such
as when a device that was to be tested was not installed.
Test-specific string
is additional information that you can use to analyze the problem.
8
Models 200 and 225 Service Guide