IBM ThinkPad 560, Руководство пользователя

Страница: 217 / 263

Advanced Information for PC Cards
DEVICEHIGH=C:\THINKPAD\PAWATAS.SYS
Using an ATA card, an SRAM card, and a Flash card:
DEVICEHIGH=C:\THINKPAD\FLSHDMTD.SYS
(↑ Flash card Memory Technology driver)
DEVICEHIGH=C:\THINKPAD\PAWATASF.SYS
(↑ ATA SRAM Flash card driver)
Note:
When the total storage of the Flash cards used at the
same time exceeds 10MB, you must do one of the
following:
Assign the
/TSIZE:
n parameter in the
PAWATASF.SYS file.
For example:
1. If the maximum total storage is 20MB, specify:
DEVICE=PAWATASF.SYS /TSIZE:6
2. If the maximum total storage is 40MB, specify:
DEVICE=PAWATASF.SYS /TSIZE:1
See the
/TSIZE
parameter on page 203.
This increases the memory resident area for
PAWATASF.SYS.
Assign the
/EMS
parameter in the PAWATASF.SYS
file, and the
/NE
parameter in the IBMDOSCS.SYS
file. This sets IBMDOSCS.SYS not to use the EMS
page frame and allows PAWATASF.SYS to use it
instead. (The EMS memory must be enabled.)
For example:
DEVICE=IBMDOSCS.SYS /NE /FLASH
:
DEVICE=PAWATASF.SYS /EMS
Appendix B. Advanced Information for PC Cards
199