IBM ThinkPad 560, Руководство пользователя

Страница: 151 / 263

Installing the PC Card Director for Windows 95
Installing the PC Card Director for Windows 95
Note:
The ThinkPad computer has three
different sets of PCMCIA Feature
software: one for DOS/Windows, one
for OS/2 Warp, and one for Windows
95. To use the PCMCIA features in the Windows 95 environment, you
need to do the following. Each step is explained in detail following
this summarized procedure.
1. If you have already installed the PC Card Director for DOS and
Windows, disable it (enable the Windows 95 Integrated PCMCIA
support software).
2. Install the Socket Services device driver.
3. Install the PC Card Director for Windows 95.
Disabling the PC Card Director for DOS and Windows
If the PC Card Director for DOS and Windows has been already
installed on your computer, you must remove the PC Card Director
for DOS and Windows before installing the PCMCIA support software
for Windows 95. This is because the Windows 95 installation
program does not automatically remove the PC Card Director for
DOS and Windows.
To remove the PC Card Director for DOS and Windows, do the
following (this procedure also enables the Windows 95 Integrated
PCMCIA support software):
1
Start Windows 95.
2
Select My Computer, Control Panel, and PC Card.
3
Select No for the question “Are you using a PC card to
install Windows?” and click on Next.
4
Select No for the question “Do you want to review your
system files and select real-mode PC card drivers so
Windows can disable them?”
5
Click on Finish to complete the Windows 95 PCMCIA
support setup.
6
Restart your computer.
Chapter 7. Installing Software
133