IBM System x3755Types 7163, Руководство по установке

Страница: 30 / 88

Installing a ServeRAID-8k SAS controller
To replace the ServeRAID-8k-l SAS controller with a ServeRAID-8k SAS controller,
review the following information:
v
A ServeRAID-8k SAS controller can be installed only in the dedicated slot on the
I/O board.
v
The ServeRAID-8k SAS controller is not cabled to the server, and no rerouting of
the SAS cables is required.
The following illustration shows how to install a ServeRAID-8k SAS controller.
Battery
RAID controller
Battery cable
Battery cable
connector
For more detailed instructions or information, see the User’s Guide on the IBM
Documentation CD.
If you have other devices to install or remove, do so now; otherwise, go to
“Completing the installation” on page 20.
Installing an adapter
The PCI bus configuration is as follows:
v
Non-hot-plug, full-length PCI Express x16 (x16 lanes) slot 1.
v
Non-hot-plug, full-length PCI Express x8 (x8 lanes) slot 2 and slot 3.
v Non-hot-plug, full-length PCI Express x4 (x4 lanes) slot 4.
v Non-hot-plug, full-length 64-bit/100 MHz or 133 MHz slot 5 and slot 6. See
Table 5 for slot speed assignments for slot 5 and slot 6.
Table 5. Slot 5 and slot 6 bus speed assignments
Slot 5 Slot 6 Bus speed
PCI-X 133 MHz adapter Unpopulated 100 MHz
Unpopulated PCI-X 133 MHz adapter 133 MHz
PCI-X 133 MHz adapter PCI-X 133 MHz adapter 100 MHz
18
IBM System x3755 Types 8877 and 7163: Installation Guide