IBM System x3755Types 7163, Руководство по установке

Страница: 28 / 88

To install an additional microprocessor/memory card, complete the following steps:
1. Read the safety information that begins on page v and “Installation guidelines”
on page 7.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables necessary to replace the device.
3. Remove the top cover.
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling these devices,
see “Handling static-sensitive devices” on page 9.
4. Prepare the microprocessor/memory card:
a. Touch the static-protective package that contains the microprocessor/
memory card to any unpainted surface on the outside of the server; then,
remove the microprocessor/memory card from the package.
b. If you are installing DIMMs on the microprocessor/memory card, install the
DIMMs (see “Installing a memory module” on page 11).
c. If necessary, close the microprocessor/memory card air baffle.
Air baffle
5. Install the microprocessor/memory card.
Attention: When you move the microprocessor/memory card, do not allow it
to touch any components or structures inside the server.
a. Grasp the microprocessor/memory card by the retention levers and turn the
microprocessor/memory card so that the connectors align with the
connectors on the I/O board.
b. Align the microprocessor/memory card with the guides.
c. Press the microprocessor/memory card into the connectors and close the
retention levers. Slide the retention tabs to lock the card in place.
If you have other devices to install or remove, do so now; otherwise, go to
“Completing the installation” on page 20.
Installing an adapter
The following sections describe how to install adapters in the server.
16
IBM System x3755 Types 8877 and 7163: Installation Guide