IBM System x3100 M4, Руководство по диагностике и обслуживанию

Страница: 307 / 332

sure that you download the version for your operating system. You can download
the ASU from the IBM website. To download the ASU and update the UUID,
complete the following steps.
Note: Changes are made periodically to the IBM website. The actual procedure
might vary slightly from what is described in this document.
1. Download the Advanced Settings Utility (ASU):
a. Go to http://www.ibm.com/support/entry/portal/docdisplay?&lndocid=TOOL-
CENTER.
b. Scroll down to Configuration and click Advanced Settings Utility .
c. In the next window under Related Information, click the Advanced Settings
Utility link and download the ASU version for your operating system.
2. ASU sets the UUID in the integrated management module II (IMM2). Select one
of the following methods to access the integrated management module II
(IMM2) to set the UUID:
v
Online from the target system (LAN or keyboard console style (KCS) access)
v
Remote access to the target system (LAN based)
v
Bootable media containing ASU (LAN or KCS, depending upon the bootable
media)
Note: IBM provides a method for building a bootable media. You can create
a bootable media using the Bootable Media Creator (BoMC) application from
the Tools Center website.
3. Copy and unpack the ASU package, which also includes other required files, to
the server. Make sure that you unpack the ASU and the required files to the
same directory. In addition to the application executable (asu or asu64), the
following files are required:
v
For Windows based operating systems:
– ibm_rndis_server_os.inf
– device.cat
v
For Linux based operating systems:
– cdc_interface.sh
4. After you install ASU, use the following command syntax to set the UUID:
asu set SYSTEM_PROD_DATA.SysInfoUUID <uuid_value> [access_method]
Where:
<uuid_value>
Up to 16-byte hexadecimal value assigned by you.
[access_method]
The access method that you selected to use from the following
methods:
v
Online authenticated LAN access, type the command:
[host <IMM2_internal_ip>] [user <IMM2_user_id>][password
<IMM2_password>]
Where:
IMM2_internal_ip
The IMM2 internal LAN/USB IP address. The default value is
169.254.95.118.
IMM2_user_id
The IMM2
account
(1 of 12 accounts). The default value is USERID.
Chapter 6. Configuration information and instructions
287