IBM System Storage TS7650G 3958 DD4, Инструкция по плану установки

Страница: 157 / 232

Chapter 11. Using ProtecTIER Manager
The ProtecTIER Manager GUI enables the registration of ProtecTIER nodes, and
the creation and maintenance of data repositories. For more information, refer to
the IBM System Storage ProtecTIER User's Guide for Enterprise Edition and Appliance
Edition, IBM form number GC53–1156.
For best results, set the monitor screen resolution to 1280 x 1024.
Adding a node to the ProtecTIER Manager GUI
The Add Node process registers the node's IP address and port number with the
instance of the ProtecTIER Manager GUI running on the TSSC or the ProtecTIER
Manager workstation. You must add the node in ProtecTIER Manager before you
can create the repository.
Procedure
1. Start the ProtecTIER Manager application using the applicable procedure
below:
If the ProtecTIER Manager GUI is installed on the TSSC
a. If the TSSC is not already powered-on, do so now.
b.
If prompted for login information, enter the username: service and the
password: service.
The TSSC's blue desktop displays.
c. Right-click on the TSSC's blue desktop.
The IBM TS3000 System Console menu displays.
d. Select Browser Functions
→
ProtecTIER Manager Functions
→
Launch
ProtecTIER Manager GUI .
The ProtecTIER Manager screen opens. See Figure 40 on page 120.
e. Go to step 2 on page 120.
If the ProtecTIER Manager GUI is installed on a Windows-based workstation
a. Click Start → Programs → IBM → ProtecTIER Manager 2.3.2.0 → IBM
ProtecTIER Manager .
The ProtecTIER Manager screen opens. See Figure 40 on page 120.
b. Go to step 2 on page 120.
If the ProtecTIER Manager GUI is installed on a Linux-based workstation
a. Double-click the PT Manager icon found on the Linux desktop, or in the
shortcut location you specified during installation.
The ProtecTIER Manager screen opens. See Figure 40 on page 120.
b. Go to step 2 on page 120.
© Copyright IBM Corp. 2008, 2010
119
|