IBM System Storage TS7650G 3958 DD4, Инструкция по плану установки

Страница: 140 / 232

(a)dd a new record
(e)dit a record
(d)elete a record
(c)ommit changes
(q)uit
Please Choose (a,e,d,c,q):
10. Type: q <enter>
The message below displays:
Would you like to commit the changes performed to the routing table
now? (yes|no)
11. Type: yes <enter> .
The
Successfully committed changes!
message displays, and you are
returned to the command prompt.
Configuring the first server for OpenStorage
This topic details the procedure for configuring the first server for OpenStorage
using ptconfig.
About this task
Important: Commands are case sensitive. Use care to enter the characters exactly
as shown.
Perform the procedures below on all newly-purchased 3958 DD4 servers. In a
replication environment, these procedures must be performed on the servers at
both the source and destination sites. Configuration instructions for legacy 3958
DD1, 3958 DD3, or 3958 AP1 servers are provided in the IBM System Storage
ProtecTIER Software Upgrade and Replication Enablement Guide, IBM form number
GC53–1196.
On the stand-alone server, or on Server A in a cluster:
Procedure
1. At the server's command prompt, change to the /opt/dtc/install directory.
Enter the command:
cd /opt/dtc/install <enter>
2. Execute the ptconfig utility. Enter the command:
./ptconfig -install -model=TS7650G -app=OST_1G <enter>
The following messages display:
Stopping services, please wait
Stopping Cluster Services [ Done ]
Services stopped
Checking conditions...
Checking BOM [ Done ]
Checking for existing nodes [ Done ]
Checking NICs for Replication [ Done ]
Checking repository [ Done ]
Checking conditions done
102
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide
|
|
|
|
|
|
|
|
|