IBM System Storage TS7650G 3958 DD4, Инструкция по плану установки

Страница: 158 / 232

Any configured networked systems are listed along with their IP addresses in
the Nodes section of the Navigation pane, and are available for login.
2. On the ProtecTIER Manager toolbar, click the (Add Node) button.
The Add node dialog displays and prompts you for the IP address and port
number of the node you want to add.
3. Enter the IP address of the node to be added, and then click Ok.
Note: Do not change the port number of the node unless directed to do so by
IBM Support.
The node appears in the Nodes pane and the Login button displays in the
View
pane.
The Success dialog displays and provides information about the repository,
which is created in an upcoming procedure.
4. Click Login.
5. When prompted for login information, enter ptadmin for both the username
and password, and then click Ok.
ProtecTIER Manager displays the information for the added node. If the node
has an existing repository, the node's cluster displays on the Systems tab of the
Navigation
pane. If the cluster contains a second node, that node displays in
the Nodes pane.
6. Go to “Planning the repository” on page 121.
Figure 40. ProtecTIER Manager screen
120
IBM System Storage TS7600 with ProtecTIER: Installation Roadmap Guide