IBM System Storage DS4000, Руководство по техническому обслуживанию аппаратной части, Страница: 51 / 184

Fibre channel host cable requirements
For the Type 3526 fibre channel RAID controller, you must use multi-mode,
50-micrometer fiber-optic cable and a Media Interface Adapter (MIA), shown in
Figure 10.
Table 16 provides specifications for the MIA.
Table 16. Type 3526 fibre channel RAID controller MIA specifications
Cable Media type Data size
Transfer
speed Range
Fiber-optic (multi-mode,
50-micrometer)
Short-wave
laser
100 MBps 1062.5
Mbaud
up to 500 m
(1640 ft.)
LVD-SCSI drive cable requirements
To connect the controller unit to a drive module, you must use 68-pin, VHDCI
(very high density cable interface) LVD, Ultra 2 SCSI cables. The controller unit has
six drive connectors that support 16-bit interface protocols. Each connector
represents a single drive channel that supports up to 10 drives per channel for a
total of 60 drives.
Figure 9. Fibre Host ID
Figure 10. Media Interface Adapter
Chapter 6. Type 3526 Fibre Channel RAID Controller
23