IBM Remote Supervisor Adapter II, Руководство пользователя

Страница: 34 / 132

To verify whether the selected Remote Supervisor Adapter II is the gateway to the
interconnect network, complete the following steps:
1. Log in to the Remote Supervisor Adapter II for which you want to see the alert
forwarding status. For more information, see Chapter 2, “Opening and using the
Web interface,” on page 5.
2. In the navigation pane, click Alerts and scroll down to the Alert Forwarding
area.
3. The Status field shows whether the Remote Supervisor Adapter II is the
gateway and, if it is, whether it is a user-configured or negotiated gateway. The
following values are possible:
v
Not a gateway for ISMPs
v User configured gateway for ISMPs
v
Negotiated gateway for ISMPs
Setting remote alert attempts
Note: For the Remote Supervisor Adapter II SlimLine, the configuring remote alert
attempts feature is available only when using LAN-based alert functionality.
The remote alert attempts settings apply only to forwarded alerts.
Complete the following steps to set the number of times that the Remote Supervisor
Adapter II attempts to send an alert:
1. Log in to the Remote Supervisor Adapter II on which you want to set remote
alert attempts. For more information, see Chapter 2, “Opening and using the
Web interface,” on page 5.
2. In the navigation pane, click Alerts and scroll down to the Global Remote Alert
Settings area.
Use these settings to define the number of remote alert attempts and the length
of time between the attempts. The settings apply to all configured remote alert
recipients.
26
Remote Supervisor Adapter II SlimLine and Remote Supervisor Adapter II: User’s Guide