IBM RackSwitch G8000, Инструкция по применению

Страница: 180 / 362

178
RackSwitch G8000: Application Guide
vCenter VE Details
If a vCenter is available, the following ISCLI privileged EXEC command displays
detailed information about a specific VE:
VMready Configuration Example
This example has the following characteristics:
•
A VMware vCenter is fully installed and configured prior to VMready configura-
tion and includes a “
bladevm
” administration account and a valid SSL certifi-
cate.
• The distributed VM group model is used.
• The VM profile named “Finance” is configured for VLAN 30, and specifies
NIC-to-switch bandwidth shaping for 1Mbps average bandwidth, 2MB bursts,
and 3Mbps maximum bandwidth.
• The VM group includes four discovered VMs on switch server ports 1 and 2, and
one static trunk (previously configured) that includes switch uplink ports 3 and 4.
1. Define the server ports.
2. Enable the VMready feature.
3. Specify the VMware vCenter IPv4 address.
When prompted, enter the user password that the switch must use for access to
the vCenter.
4. Create the VM profile.
RS G8000#
show virt vmware showvm
{
<VM UUID>
|
<VM IPv4 address>
|
<VM name>
}
----------------------------------------------------------------------
MAC Address 00:50:56:9c:21:2f
Port 4
Type Virtual Machine
VM vCenter Name halibut
VM OS hostname localhost.localdomain
VM IP Address 172.16.46.15
VM UUID 001c41f3-ccd8-94bb-1b94-6b94b03b9200
Current VM Host 172.16.46.10
Vswitch vSwitch0
Port Group BNT_Default
VLAN ID 0
RS G8000(config)#
system server-ports port 1-2
RS G8000(config)#
virt enable
RS G8000(config)#
virt vmware vmware vcspec 172.16.100.1 bladevm
RS G8000(config)#
virt vmprofile Finance
RS G8000(config)#
virt vmprofile edit Finance vlan 30
RS G8000(config)#
virt vmprofile edit Finance shaping 1000 2000 3000