IBM QS22 - BladeCenter - 0793, Инструкция по установке и эксплуатации

Страница: 48 / 114

7. Using the blue handling areas, carefully push the card down to insert it into the
connectors. Ensure that the ball stud on the system board engages with the ball
socket on the SAS expansion card.
If you have other options to install, do so now. Otherwise, go to “Finishing the
installation” on page 35.
Installing the BladeCenter PCI Express I/O Expansion Unit
Important:
v
A BladeCenter QS22 with the BladeCenter PCI Express I/O Expansion Unit
installed takes up two contiguous slots in the BladeCenter chassis.
v You must remove any expansion card that uses the high-speed connector before
installing the expansion unit.
Expansion
card
Figure 22. SAS expansion card location
Cover pins
Cover release
Cover release
Figure 23. Installing the expansion unit
32
BladeCenter QS22 Type 0793: Installation and User’s Guide