IBM pseries 655, Руководство по установке

Страница: 94 / 212

3. Remove the adapter or blank filler and ensure that the handle is in the up position. If you need to
move the handle, ensure that the locking bar is pulled into the unlocked position, and then rotate the
adapter handle until the handle is in the up position (the cassette linkage assembly will extend down
beyond the cassette top).
If you are installing a short adapter or blank filler, go to “Short Adapter or Blank Filler Installation.” If
you are installing a long adapter, go to “Long Adapter Installation” on page 95.
2
1
1 Handle Release Lever
2 Lock
Short Adapter or Blank Filler Installation
To install a short adapter or blank filler, do the following:
1. Place the adapter or blank filler into the cassette so that the upper-left corner of the adapter engages
the adjustable top adapter-retaining clip as shown in the following illustration.
78
Eserver
pSeries 655 Installation Guide