IBM pseries 655, Руководство по установке

Страница: 149 / 212

The following illustration shows the location codes for a maximum I/O configuration with five processor
subsystems and five I/O drawers.
I/O Drawer
U1.1-P2
I/O Drawer
U1.5-P2
U1.5-P1
Processor
Subsystem
U1.9
Processor
Subsystem
U1.10
I/O Drawer
U1.13-P2 U1.13-P1
U1.17
Processor
Subsystem
U1.19
Processor
Subsystem
U1.20
I/O Drawer
U1.23-P2
U1.23-P1
I/O Drawer
U1.27-P2
U1.27-P1
Processor
Subsystem
U1.31 U1.32
Bulk Power Enclosure
Empty
Hardware Management Console
(optional)
Hardware Management Console
(standard)
U1.1-P1
Notes:
1. A sixth processor subsystem may be installed in location U1.32, but an I/O subsystem is not available
for this subsystem.
2. If IBFs are installed, placement in the rack must be as follows:
v The first and second IBF must be installed in location U1.13-P1 and U1.13-P2
v
The third and fourth IBF must be installed in location U1.15-P1 and U1.15-P2
v Location U1.17 is reserved for the fifth and sixth IBF. If only one to four IBFs are installed, location
U1.17 remains empty.
3. The I/O drawers can be installed in any location that is open in the frame. There are no fixed locations
for I/O subsystems. Install the I/O drawer as close as possible to the processor subsystem that it will
be connected to, either above or below the processor subsystem.
Appendix E. System Records
133