manualshive.com logo in svg

IBM PowerPC 750GX, Руководство пользователя

IBM PowerPC 750GX - мощный процессор для высокопроизводительных систем. Инструкция пользователя доступна для бесплатного скачивания на нашем сайте. Получите полное руководство по эксплуатации на manualshive.com. Узнайте, как максимально эффективно использовать этот продукт для достижения ваших целей.

Поделиться
Скачать
background image

 
User’s Manual
IBM PowerPC 750GX and 750GL RISC Microprocessor

Page 22 of 377

gx_preface.fm.(1.2)

March 27, 2006

Using This Manual with the Programming Environments Manual

Because the PowerPC Architecture is designed to be flexible to support a broad range of processors, the 
PowerPC Microprocessor Family: The Programming Environments Manual provides a general description of 
features that are common to PowerPC processors and indicates those features that are optional or that might 
be implemented differently in the design of each processor.

This document and The Programming Environments Manual describe three levels, or programming environ-
ments, of the PowerPC Architecture:

• PowerPC user instruction set architecture (UISA)—The UISA defines the level of the architecture to 

which user-level software should conform. The UISA defines the base user-level instruction set, user-
level registers, data types, memory conventions, and the memory and programming models seen by 
application programmers.

• PowerPC virtual environment architecture (VEA)—The VEA, which is the smallest component of the 

PowerPC Architecture, defines additional user-level functionality that falls outside typical user-level soft-
ware requirements. The VEA describes the memory model for an environment in which multiple proces-
sors or other devices can access external memory and defines aspects of the cache model and cache-
control instructions from a user-level perspective. The resources defined by the VEA are particularly use-
ful for optimizing memory accesses and for managing resources in an environment in which other proces-
sors and other devices can access external memory.

Implementations that conform to the PowerPC VEA also conform to the PowerPC UISA, but might not 
necessarily adhere to the OEA.

• PowerPC operating environment architecture (OEA)—The OEA defines supervisor-level resources typi-

cally required by an operating system. The OEA defines the PowerPC memory-management model, 
supervisor-level registers, and the exception model. 

Implementations that conform to the PowerPC OEA also conform to the PowerPC UISA and VEA.

Some resources are defined more generally at one level in the architecture and more specifically at another. 
For example, conditions that cause a floating-point exception are defined by the UISA, while the exception 
mechanism itself is defined by the OEA.

Because it is important to distinguish between the levels of the architecture in order to ensure compatibility 
across multiple platforms, those distinctions are shown clearly throughout this book.

For ease in reference, the arrangement of topics in this book follows that of The Programming Environments 
Manual. Topics build upon one another, beginning with a description and complete summary of 750GX-
specific registers and instructions and progressing to more specialized topics such as 750GX-specific details 
regarding the cache, exception, and memory-management models. Therefore, chapters can include informa-
tion from multiple levels of the architecture. (For example, the discussion of the cache model uses information 
from both the VEA and the OEA.)

The PowerPC Architecture: A Specification for a New Family of RISC Processors defines the architecture 
from the perspective of the three programming environments and remains the defining document for the 
PowerPC Architecture. For information about PowerPC documentation, see Related Publications on 
page 19.

Содержание PowerPC 750GX


























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerPC 750GX

National Instruments NI 5922 Calibration Procedure preview
NI 5922
Бренд: National Instruments Страницы: 28
National Instruments NI 9219 Getting Started preview
NI 9219
Бренд: National Instruments Страницы: 19
National Instruments NI 6711 User Manual preview
NI 6711
Бренд: National Instruments Страницы: 103
National Instruments NI PXI-1042 Series Installation Manual preview
NI PXI-1042 Series
Бренд: National Instruments Страницы: 12
National Instruments PCI-1407 Setup And Operation preview
PCI-1407
Бренд: National Instruments Страницы: 4
Dahua Smart 1U Quick Start Manual preview
Smart 1U
Бренд: Dahua Страницы: 24
SUNRICH TECHNOLOGY C-330 User Manual preview
C-330
Бренд: SUNRICH TECHNOLOGY Страницы: 5
IAR SYSTEMS IAR KickStart Kit TWR-K60N512-IAR Getting Started Manual preview
IAR KickStart Kit TWR-K60N512-IAR
Бренд: IAR SYSTEMS Страницы: 8
ZALMAN CNPS6500B-AlCu User Manual preview
CNPS6500B-AlCu
Бренд: ZALMAN Страницы: 4
Avaya XM24 Expansion Module Installation Instructions preview
XM24 Expansion Module
Бренд: Avaya Страницы: 5
NC-link NC-AP111 User Manual preview
NC-AP111
Бренд: NC-link Страницы: 20
NXP Semiconductors UM10301 PCA8565 User Manual preview
UM10301 PCA8565
Бренд: NXP Semiconductors Страницы: 54
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Бренд: Paradyne Страницы: 108
Beckhoff EK1122 Documentation preview
EK1122
Бренд: Beckhoff Страницы: 84
FOR-A USF-105PS Operation Manuals preview
USF-105PS
Бренд: FOR-A Страницы: 37
RME Audio AI4S-192 AIO User Manual preview
AI4S-192 AIO
Бренд: RME Audio Страницы: 7
ADTRAN NetVanta 1224R Specifications preview
NetVanta 1224R
Бренд: ADTRAN Страницы: 4
LAWO A_madi4 User Manual preview
A_madi4
Бренд: LAWO Страницы: 68

Бренды по названию

Популярные бренды

Загрузить еще бренды