manualshive.com logo in svg

IBM PowerPC 750GX, Руководство пользователя

IBM PowerPC 750GX - мощный процессор для высокопроизводительных систем. Инструкция пользователя доступна для бесплатного скачивания на нашем сайте. Получите полное руководство по эксплуатации на manualshive.com. Узнайте, как максимально эффективно использовать этот продукт для достижения ваших целей.

Поделиться
Скачать
background image

 
User’s Manual
IBM PowerPC 750GX and 750GL RISC Microprocessor

Power and Thermal Management

Page 340 of 377

gx_10.fm.(1.2)

March 27, 2006

10.2.2 Power Management Software Considerations

Since the 750GX is a dual-issue processor with out-of-order execution capability, care must be taken in how 
the power management mode is entered. Furthermore, nap and sleep modes require all outstanding bus 
operations to be completed before these power management modes are entered. Normally, during system 
configuration time, one of the power management modes would be selected by setting the appropriate HID0 
mode bit. Later on, the power management mode is invoked by setting the MSR[POW] bit. To ensure a clean 
transition into and out of a power management mode, the Move-to Machine State Register (mtmsr) (POW) 
instruction should be preceded by a Synchronize (sync) instruction and followed by an Instruction Synchro-
nize (isync) as shown below. 

...
loop:
sync
mtmsr (POW)
isync
br loop
...

10.3 750GX Dual PLL Feature

10.3.1 Overview

Due to the relationship of power to frequency and voltage (power is proportional to frequency and a square of 
voltage), running the processor at a lower frequency and associated lower voltage can result in significant 
power savings. The 750GX design includes two PLLs (PLL0 and PLL1), which allows the processor clock 
frequency to be dynamically changed to one of the PLL frequencies via software control. The HID1 Register 
(described in Section 2.1.2.3 on page 70) contains fields that specify the frequency range of each PLL, the 
clock multiplier for each PLL, external or internal control of PLL0, and a bit to choose which PLL is selected 
(that is, which is the source of the processor clock at any given time). In addition, the supplied processor 
voltage (V

DD

) can be varied to support the selected frequency: lower voltage, lower frequency, and lower 

power for normal processing tasks or higher voltage, higher frequency for situations requiring high perfor-
mance. PLL voltages (AV

DD

) should remain constant at all times.

At power-on reset, the HID1 Register contains zeros for all the non-read-only bits (bits 7 to 31). This configu-
ration corresponds to the selection of PLL0 as the source of the processor clocks, and selects the external 
configuration and range pins to control PLL0 (see Chapter 8, Bus Interface Operation, on page 279). The 
external configuration and range pin values are accessible to software via HID1 read-only bits 0-6. PLL1 is 
always controlled by its internal configuration and range bits. The HID1 setting associated with a hard reset 
corresponds to a PLL1 configuration of clock off, and the selection of the medium frequency range.

As stated in the PowerPC 750GX RISC Microprocessor Datasheet, HRESET must be asserted during power 
up long enough for the PLLs to lock and for the internal hardware to be reset. Once this timing is satisfied, 
HRESET can be negated. The processor will now proceed to execute instructions, clocked by PLL0 as 
configured via the external pins. The processor clock frequency can be modified from this initial setting in one 
of two ways. First, as with earlier designs, HRESET can be asserted, and the external configuration pins can 
be set to a new value. The machine state is lost in this process, and, as always, HRESET must be held 
asserted while the PLL relocks, and the internal state is reset. Second, the introduction of another PLL 
provides an alternative means of changing the processor clock frequency, which does not involve the loss of 
machine state, nor a delay for PLL relock.

Содержание PowerPC 750GX


























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerPC 750GX

D-Link DES-1210-08P Manual preview
DES-1210-08P
Бренд: D-Link Страницы: 15
CAME QBEMFSB2 User Manual preview
QBEMFSB2
Бренд: CAME Страницы: 19
Radwin Transportation FiberinMotion Deployment Manual preview
Transportation FiberinMotion
Бренд: Radwin Страницы: 122
Zhone 6211 Quick Installation Instructions preview
6211
Бренд: Zhone Страницы: 1
Orban OPTIMOD 6300 Operating Manual preview
OPTIMOD 6300
Бренд: Orban Страницы: 255
STMicroelectronics ST62GP-EMU2 HDS2 Series User Manual preview
ST62GP-EMU2 HDS2 Series
Бренд: STMicroelectronics Страницы: 58
SAB SABVISION NVR32 Quick Start Manual preview
SABVISION NVR32
Бренд: SAB Страницы: 29
Aurora EGO AE120 User Manual preview
EGO AE120
Бренд: Aurora Страницы: 6
JETWAY I848ASR1A User Manual preview
I848ASR1A
Бренд: JETWAY Страницы: 47
Keithley DAS-1800HR Series User Manual preview
DAS-1800HR Series
Бренд: Keithley Страницы: 139
iesy Open Standard Module RPX30 EVA-MI V1 Quick Start Manual preview
Open Standard Module RPX30 EVA-MI V1
Бренд: iesy Страницы: 9
V-Count Ultima Go Quick Installation Manual preview
Ultima Go
Бренд: V-Count Страницы: 2
Digi DataFire GO! PRO Manual preview
DataFire GO! PRO
Бренд: Digi Страницы: 20
Kontron AdvancedTCA AT8901M User Manual preview
AdvancedTCA AT8901M
Бренд: Kontron Страницы: 76
Radica Games DAVID-II 716 Operating And Maintenance Instruction Manual preview
DAVID-II 716
Бренд: Radica Games Страницы: 40
Airvana ipBTS C30 Installation And Commissioning Manual preview
ipBTS C30
Бренд: Airvana Страницы: 90
Renesas HD74HCT1G04 Datasheet preview
HD74HCT1G04
Бренд: Renesas Страницы: 8
CSI 7798 I/SITE LAN Installation Manual preview
7798 I/SITE LAN
Бренд: CSI Страницы: 56

Бренды по названию

Популярные бренды

Загрузить еще бренды