manualshive.com logo in svg

IBM PowerPC 750GX, Руководство пользователя

IBM PowerPC 750GX - мощный процессор для высокопроизводительных систем. Инструкция пользователя доступна для бесплатного скачивания на нашем сайте. Получите полное руководство по эксплуатации на manualshive.com. Узнайте, как максимально эффективно использовать этот продукт для достижения ваших целей.

Поделиться
Скачать
background image

 

User’s Manual

IBM PowerPC 750GX and 750GL RISC Microprocessor

gx_03.fm.(1.2)
March 27, 2006 

 

Instruction-Cache and Data-Cache Operation

Page 131 of 377

atomic access to noncoherent memory. For detailed information on these instructions, see Chapter 2, Pro-
gramming Model, on page 57. 

The lwarx instruction performs a load word from memory operation and creates a reservation for the 32-byte 
section of memory that contains the accessed word. The reservation granularity is 32 bytes. The lwarx 
instruction makes a nonspecific reservation with respect to the executing processor and a specific reservation 
with respect to other masters. This means that any subsequent stwcx. executed by the same processor, 
regardless of address, will cancel the reservation. Also, any bus write or invalidate operation from another 
processor to an address that matches the reservation address will cancel the reservation.

The stwcx. instruction does not check the reservation for a matching address. The stwcx. instruction is only 
required to determine whether a reservation exists. The stwcx. instruction performs a store word operation 
only if the reservation exists. If the reservation has been cancelled for any reason, then the stwcx. instruction 
fails and clears the CR0[EQ] bit in the Condition Register. The architectural intent is to follow the lwarx and 
stwcx. instruction pair with a conditional branch, which checks to see whether the stwcx. instruction failed.

If the page table entry is marked caching-enabled (WIMG = x0xx), and an lwarx access misses in the cache, 
then the 750GX performs a cache-block fill. If the page is marked caching-inhibited (WIMG = x1xx) or the 
cache is locked, and the access misses, then the lwarx instruction appears on the bus as a single-beat load. 
All bus operations that are a direct result of either an lwarx instruction or an stwcx. instruction are placed on 
the bus with a special encoding. Note that this does not force all lwarx instructions to generate bus transac-
tions, but rather provides a means for identifying when an lwarx instruction does generate a bus transaction. 
If an implementation requires that all lwarx instructions generate bus transactions, then the associated pages 
should be marked as caching-inhibited. 

The 750GX’s data cache treats all stwcx. operations as write-through independent of the WIMG settings. 
However, if the stwcx. operation hits in the 750GX’s L2 cache, then the operation completes with the reser-
vation intact in the L2 cache. See Chapter 9, L2 Cache, on page 323 for more information. Otherwise, the 
stwcx. operation continues to the bus interface unit for completion. When the write-through operation 
completes successfully, either in the L2 cache or on the 60x bus, then the data-cache entry is updated 
(assuming it hits), and CR0[EQ] is modified to reflect the success of the operation. If the reservation is not 
intact, the stwcx. completes in the bus interface unit without performing a bus transaction, and without modi-
fying either of the caches.

3.4 Cache Control

The 750GX’s L1 caches are controlled by programming specific bits in the HID0 Special-Purpose Register 
and by issuing dedicated cache-control instructions. Section 3.4.1 describes the HID0 cache-control bits, and 
Section 3.4.2 on page 133 describes the cache-control instructions.

3.4.1 Cache-Control Parameters in HID0

The HID0 Special-Purpose Register contains several bits that invalidate, disable, and lock the instruction and 
data caches. The following sections describe these facilities.

Содержание PowerPC 750GX


























































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для PowerPC 750GX

Barracuda Networks Network Quick Start Manual preview
Network
Бренд: Barracuda Networks Страницы: 2
Mackie SP260 Installation Instructions preview
SP260
Бренд: Mackie Страницы: 2
Mackie SP260 Product Overview preview
SP260
Бренд: Mackie Страницы: 5
Eaton INDGW-X2 Manual preview
INDGW-X2
Бренд: Eaton Страницы: 10
XMOS xCORE-200 Multi-channel Audio board Design Manual preview
xCORE-200 Multi-channel Audio board
Бренд: XMOS Страницы: 112
Paradyne Hotwire 5100 User Manual preview
Hotwire 5100
Бренд: Paradyne Страницы: 45
Acqiris SA217P Startup Manual preview
SA217P
Бренд: Acqiris Страницы: 22
Alacritech 1000x1 Hardware Installation Manual preview
1000x1
Бренд: Alacritech Страницы: 20
Renesas RL78/G1H User Manual preview
RL78/G1H
Бренд: Renesas Страницы: 941
Kramer RK-10MT Quick Start Manual preview
RK-10MT
Бренд: Kramer Страницы: 2
Bitspower BPTA-CPUMS-V2-SKA Instruction Manual preview
BPTA-CPUMS-V2-SKA
Бренд: Bitspower Страницы: 6
Lanner FW-7551 User Manual preview
FW-7551
Бренд: Lanner Страницы: 38
Lindy 32116 User Manual preview
32116
Бренд: Lindy Страницы: 12
Dataprobe iBoot Instruction Manual preview
iBoot
Бренд: Dataprobe Страницы: 16
OPTO 22 PCI-AC48 User Manual preview
PCI-AC48
Бренд: OPTO 22 Страницы: 28
CompuLab CL-SOM-AM57 Series Reference Manual preview
CL-SOM-AM57 Series
Бренд: CompuLab Страницы: 79
Renesas M34502T-MCU User Manual preview
M34502T-MCU
Бренд: Renesas Страницы: 40
ADTRAN ENHANCED PSD 239 H2R Product Manual preview
ENHANCED PSD 239 H2R
Бренд: ADTRAN Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды