IBM Power Systems 8001-22C, Руководство пользователя

Страница: 37 / 138

b. Lift the PCIe riser from the system.
c.
Place the PCIe adapter riser on an ESD surface, with the PCIe adapter riser facing up.
d. Remove the screws and the tail-stocks in positions 5 and 6.
e. Plug the GPU (A) into the PCIe adapter riser (B) as shown in Figure 16.
f. Replace the screw to secure the tail-stock.
g. Plug the GPU power cable (A) into the system backplane as shown in Figure 17. Using your
thumb, press the release latch on the connector to remove the cable.
h. Insert the GPU and PCIe riser as shown in Figure 18 on page 22.
1) Retract the retaining pin (B) so the arrow points to the system.
Figure 16. Inserting the GPU into the PCIe adapter riser
Figure 17. Plugging in the GPU power cable
Installing and configuring the system
21