IBM Power Systems 8001-22C, Руководство пользователя

Страница: 28 / 138

v
A 2.5-inch drive slides into the rear of the tool-less drive carrier.
a. Turn the tray upside down as shown in Figure 7.
b. Open the retention spring (B) as shown in Figure 8 on page 13.
c. Place the 2.5-inch drive (A) into the tray, aligning the pins with the screw holes in the drive.
d. When the pins are aligned, close the retention spring, allowing the pins to secure the drive in
the tray.
e. Turn the tray right side up.
Figure 6. Mounting the 3.5-inch drive in the tray
Figure 7. Turning the 2.5-inch tray upside-down
12
Power Systems: Installing the IBM Power System S822LC for Big Data (8001-22C)