manualshive.com logo in svg

IBM Power 770, Технический обзор и введение

Технический обзор и введение в продукт IBM Power 770 доступны для скачивания в виде бесплатного руководства. Загрузите его с manualshive.com и ознакомьтесь с основными характеристиками и особенностями этого мощного сервера. Будьте в курсе всех возможностей IBM Power 770 благодаря нашему подробному руководству.

Поделиться
Скачать
background image

Chapter 1. General description 

15

Table 1-6 summarizes the processor feature codes for the Power 780.

Table 1-6   Summary of processor features for the Power 780

Feature 
code

Description

OS 
support

EPH0

0 to 16-core 4.42 GHz  processor card:
16-core 4.42 GHz CUoD processor card containing four 
4-core processors. Each processor has 1 MB of L2 cache (256 KB per 
core) and 40 MB of L3 cache (4 MB per core). There are 16 DDR3 
DIMM slots on the processor planar (8 DIMM slots per processor), 
which can be used as capacity on demand (CoD) memory without 
activating the processors. The voltage regulators are included in this 
feature code.

AIX
IBM i
Linux

EPHA

1-core activation for processor feature FC EPH0:
Each occurrence of this feature will permanently activate one 
processor core on Processor Card FC EPH0.

AIX
IBM i
Linux

EPHN

100 on/off processor days of CoD billing for processor FC EPH0:
After the On/off Processor function is enabled in a system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is provided to your sales channel. The 
sales channel will place an order on your behalf for the quantity of this 
feature that matches your reported use. One FC EP2L provides 100 
days of on/off processor billing for  CoD Processor Book FC 
EPH0 for AIX/Linux.

AIX
Linux

EPHP

100 on/off processor days of CoD billing for processor FC EPH0:
After the On/off Processor function is enabled in a system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is provided to your sales channel. The 
sales channel will place an order on your behalf for the quantity of this 
feature that matches your reported use. One FC EP2M provides 100 
days of on/off processor billing for  CoD Processor Book FC 
EPH0 for IBM i.

IBM i

EPHE

One processor day on/off billing for FC EPH0:
After an On/Off Processor Enablement feature is ordered and the 
associated enablement code is entered into the system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is then provided to your sales channel. 
The sales channel will place an order for a quantity of On/Off Processor 
Core Day Billing features and the client will be charged. One FC 5342 
must be ordered for each billable processor core day of feature FC 
EPH0 used by a supported AIX or Linux operating system.

AIX
Linux

EPHF

One processor day on/off billing for FC EPH0:
After an On/Off Processor Enablement feature is ordered and the 
associated enablement code is entered into the system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is then provided to your sales channel. 
The sales channel will place an order for a quantity of On/ Off 
Processor Core Day Billing features and the client will be charged. One 
FC 5343 must be ordered for each billable processor core day of 
feature FC EPH0 used by a supported IBM i operating system.

IBM i

EPHU

Processor CoD utility billing for FC EPH0, 100 processor-minutes

AIX
Linux

EPHV

Processor CoD utility billing for FC EPH0, 100 processor-minutes

IBM i

Содержание Power 770





























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power 770

SilverStone ST400 STRIDER User Manual preview
ST400 STRIDER
Бренд: SilverStone Страницы: 12
Ametek AMREL SPS-A Series Operation Manual preview
AMREL SPS-A Series
Бренд: Ametek Страницы: 78
Hama Metallic Operating Instructions Manual preview
Metallic
Бренд: Hama Страницы: 48
OKUtools EPK-6.5 Operating Instructions Manual preview
EPK-6.5
Бренд: OKUtools Страницы: 18
Cleco 110PTHD55Q Instruction Manual preview
110PTHD55Q
Бренд: Cleco Страницы: 38
HIKOKI CM 5MA Handling Instructions Manual preview
CM 5MA
Бренд: HIKOKI Страницы: 196
MasterCraft MAXIMUM 054-1232-4 Instruction M preview
MAXIMUM 054-1232-4
Бренд: MasterCraft Страницы: 19
New World Technologies E- ER 700 User Manual preview
E- ER 700
Бренд: New World Technologies Страницы: 31
Gardebruk Deuba MZUK001 Instructions Manual preview
Deuba MZUK001
Бренд: Gardebruk Страницы: 34
Hama 00187238 Operating Instructions Manual preview
00187238
Бренд: Hama Страницы: 54
Parkside PBSG 1 Operation And Safety Notes preview
PBSG 1
Бренд: Parkside Страницы: 51
Central Machinery 63471 Owner'S Manual & Safety Instructions preview
63471
Бренд: Central Machinery Страницы: 16
Skil SD561802E Owner'S Manual preview
SD561802E
Бренд: Skil Страницы: 12
WETRA-XT 8595572109838 Instructions For Use Manual preview
8595572109838
Бренд: WETRA-XT Страницы: 75
Milwaukee 6276-20 Operator'S Manual preview
6276-20
Бренд: Milwaukee Страницы: 13
YATO YT-09512 Original Instructions Manual preview
YT-09512
Бренд: YATO Страницы: 104
Kikusui PCR 2000M User Manual preview
PCR 2000M
Бренд: Kikusui Страницы: 92
AXXIS COMPLETE ProGrade C-5016LMA Operating Instructions Manual preview
COMPLETE ProGrade C-5016LMA
Бренд: AXXIS Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды