manualshive.com logo in svg

IBM Power 770, Технический обзор и введение

Технический обзор и введение в продукт IBM Power 770 доступны для скачивания в виде бесплатного руководства. Загрузите его с manualshive.com и ознакомьтесь с основными характеристиками и особенностями этого мощного сервера. Будьте в курсе всех возможностей IBM Power 770 благодаря нашему подробному руководству.

Поделиться
Скачать
background image

16

 

IBM Power 770 and 780 (9117-MMD, 9179-MHD) Technical Overview and Introduction

EP9T

90 day temporary on/off processor enablement

AIX
IBM i
Linux

EPH2

0 to 32-core 3.72 GHz  processor card:
32-core 3.72 GHz  CUoD processor planar containing four 
8-core processors. Each processor has 2 MB of L2 cache (256 KB per 
core) and 80 MB of L3 cache (10 MB per core). There are 16 DDR3 
DIMM slots on the processor planar (eight DIMM slots per processor), 
which can be used as CoD memory without activating the processors. 
The voltage regulators are included in this feature code.

AIX
IBM i
Linux

EPHC

1-core activation for processor feature FC EPH2:
Each occurrence of this feature will permanently activate one 
processor core on Processor Card FC EPH2.

AIX
Linux
IBM i

EPHS

100 on/off processor days of CoD billing for processor FC EPH2:
After the On/off Processor function is enabled in a system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is provided to your sales channel. The 
sales channel will place an order on your behalf for the quantity of this 
feature that matches your reported use. One FC EPHS provides 100 
days of on/off processor billing for  CoD Processor Book FC 
EPH2 for AIX/Linux.

AIX
Linux

EPHT

100 on/off processor days of CoD billing for processor FC EPH2:
After the On/off Processor function is enabled in a system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is provided to your sales channel. The 
sales channel will place an order on your behalf for the quantity of this 
feature that matches your reported use. One FC EP2P provides 100 
days of on/off processor billing for  CoD Processor Book FC 
EPH2 for IBM i.

IBM i

EPHJ

One processor day on/off billing for FC EPH2:
After an On/Off Processor Enablement feature is ordered and the 
associated enablement code is entered into the system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is then provided to your sales channel. 
The sales channel will place an order for a quantity of On/ Off 
Processor Core Day Billing features and the client will be charged. One 
FC EP27 must be ordered for each billable processor core day of 
feature FC EPH2 used by a supported AIX or Linux operating system.

AIX
Linux

EPHK

One processor day on/off billing for FC EPH2:
After an On/Off Processor Enablement feature is ordered and the 
associated enablement code is entered into the system, you must 
report your on/off usage to IBM at least monthly. This information, used 
to compute your billing data, is then provided to your sales channel. 
The sales channel will place an order for a quantity of On/ Off 
Processor Core Day Billing features and the client will be charged. One 
FC EP29 must be ordered for each billable processor core day of 
feature FC EPH2 used by a supported IBM i operating system.

IBM i

EPHY

Processor CoD utility billing for FC EPH0, 100 processor-minutes

AIX
Linux

EPHZ

Processor CoD utility billing for FC EPH0, 100 processor-minutes

IBM i

Feature 
code

Description

OS 
support

Содержание Power 770





























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power 770

RAMSET D60 Operator'S Safety & Operating Instruction Manual preview
D60
Бренд: RAMSET Страницы: 18
Matatakitoyo Torque Tools MOT4 Operation Manual preview
MOT4
Бренд: Matatakitoyo Torque Tools Страницы: 2
Gallagher PowerPlus B40 Instructions Manual preview
PowerPlus B40
Бренд: Gallagher Страницы: 76
Sanela SLZ 07 Mounting Instructions preview
SLZ 07
Бренд: Sanela Страницы: 2
ICON 58003 Owner'S Manual & Safety Instructions preview
58003
Бренд: ICON Страницы: 8
Unimac NALFLRUMCA2XH User Manual preview
NALFLRUMCA2XH
Бренд: Unimac Страницы: 15
Yamato CS 36NK Instruction Manual preview
CS 36NK
Бренд: Yamato Страницы: 12
Delta Elektronika SM 120-50 Manual preview
SM 120-50
Бренд: Delta Elektronika Страницы: 21
Valcom VP-2024 Technical Specifications preview
VP-2024
Бренд: Valcom Страницы: 2
Campbell Hausfeld SN268K00 Operating Instructions Manual preview
SN268K00
Бренд: Campbell Hausfeld Страницы: 12
ferrotec Temescal CV-12SLX User Manual preview
Temescal CV-12SLX
Бренд: ferrotec Страницы: 94
Pyramid PS32LAB Short Instruction Manual preview
PS32LAB
Бренд: Pyramid Страницы: 4
F.F. Group GVE 174 PLUS Original Instructions Manual preview
GVE 174 PLUS
Бренд: F.F. Group Страницы: 52
MAC TOOLS MPF59025 Instruction Manual preview
MPF59025
Бренд: MAC TOOLS Страницы: 32
Cocraft LXC MTG18 Original Instructions Manual preview
LXC MTG18
Бренд: Cocraft Страницы: 40
Outils Wolf 69124 Manual preview
69124
Бренд: Outils Wolf Страницы: 32
Timber Tuff Tools CS-MBCJR Assembly & Owners Manual preview
CS-MBCJR
Бренд: Timber Tuff Tools Страницы: 10
Silverline 125963 Instructions Manual preview
125963
Бренд: Silverline Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды