IBM Power 730 Express 8231-E2B, Руководство пользователя

Страница: 48 / 112

v A : Power-on button
v B : Power LED
– A constant light indicates full system power to the unit.
– A flashing light indicates standby power to the unit.
Note: There is approximately a 30-second transition period from the time the power-on button is
pressed to when the power LED goes from flashing to solid. During the transition period, the LED
might flash faster.
v C : Enclosure identify light
– A constant light indicates the identify state, which is used to identify a part.
– No light indicates that the system is operating normally.
v D : System information light
– No light indicates that the system is operating normally.
– Light on indicates that the system requires attention.
v E : USB port
v F : Enclosure fault roll-up light
– A constant light indicates a fault in the system unit.
– No light indicates that the system is operating normally.
v G : Function/Data display
v H : Decrement button
v I : Enter button
v J : Increment button
v K : Pinhole reset button
Related concepts :
Identifying a failing part
Use these instructions to learn how to locate and identify a failing part on your system or expansion unit
using the appropriate method for your system.
Figure 26. Control panel
36
Power Systems: System backplane for the 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, or 8268-E1D