IBM PC 300PL, Установка

Страница: 88 / 112

Before you begin
Ÿ
Using the Configuration/Setup Utility program, record all configuration
information. Clearing CMOS memory sets the configuration of your
computer to the default settings. Because you need to reconfigure the
computer after clearing CMOS memory, record the configuration information
of your computer before moving the Clear CMOS Request jumper.
Ÿ
Read “Electrical Safety” on page 4 and “Handling Static-Sensitive Devices”
on page 5.
Ÿ
Turn off the computer and disconnect all cables except the power cord.
Ÿ
Remove the computer cover.
Ÿ
Lay the computer on its side.
Ÿ
Locate the Clear CMOS Request jumper. See “Identifying Parts on the
System Board” on page 13.
Note: You might have to remove adapters to gain access to the jumper. See
“Removing Adapters from the Riser Card” on page 34.
1
Move the jumper from its normal position (pins 1 and 2) to pins 2 and 3. It
might be helpful to use needle-nose pliers to move the jumper, but be careful
not to scrape any system board components or crush the jumper.
1
2
3
1
2
3
1
2
3
CAUTION:
Do not touch any of the internal components of the computer.
2
Reconnect the cables and turn on the computer. CMOS memory is now
cleared and the passwords have been erased. After the POST completes,
configuration error messages are displayed.
3
Follow the instructions on the screen to continue.
74
Installing Options in Your Personal Computer
All manuals and user guides at all-guides.com