IBM PC 300PL, Установка

Страница: 45 / 112

Installing Adapters in the Riser Card
Before you begin
Ÿ
Read “Electrical Safety” on page 4 and “Handling Static-Sensitive Devices”
on page 5.
Ÿ
Read the instructions that come with the new adapter. Determine if the
adapter must be installed in an ISA or PCI slot.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer (see “Disconnecting Cables
and Removing the Cover” on page 6).
Attention: The presence of 5 V standby power might result in damage to
your hardware unless you disconnect the power cord from the wall before
opening the computer.
Ÿ
Remove the computer cover, and lay the computer on its side (see
“Disconnecting Cables and Removing the Cover” on page 6).
Ÿ
To install some adapters, you might need to remove the bottom cover, the
system board, and the fan. For more information, see “Opening the Bottom
Cover” on page 39, “Moving the System Board” on page 41, and “Moving
the Front Fan” on page 44.
1
Remove the screw and bracket.
Chapter 4. Working with Adapters
31
All manuals and user guides at all-guides.com