background image

EL-MF877-00

Page 1 

Template Revision B 

PSG instructions for this template are available at 

EL-MF877-01

 

Product End-of-Life Disassembly Instructions

 

Product Category: Personal Computers

 

Marketing Name / Model 
[List multiple models if applicable.] 

HP EliteDesk 800 G2 DM Retail System

 

Purpose: 

The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions 

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU 
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE). 

1.0

 

Items Requiring Selective Treatment

 

1.1 Items listed below are classified as requiring selective treatment. 
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as 
applicable. 

Item Description 

Notes 

Quantity 
of items 
included 
in product

 

Printed Circuit Boards (PCB) or Printed Circuit 
Assemblies (PCA) 

With a surface greater than 10 sq cm 

Batteries 

All types including standard alkaline and lithium coin 
or button style batteries      

Mercury-containing components 

For example, mercury in lamps, display backlights, 
scanner lamps, switches, batteries       

Liquid Crystal Displays (LCD) with a surface greater 
than 100 sq cm 

Includes background illuminated displays with gas 
discharge lamps       

Cathode Ray Tubes (CRT) 

Capacitors / condensers (Containing PCB/PCT) 

Electrolytic Capacitors / Condensers measuring 
greater than 2.5 cm in diameter or height 

External electrical cables and cords 

Gas Discharge Lamps 

Plastics containing Brominated Flame Retardants 
weighing > 25 grams (not including PCBs or PCAs 
already listed as a separate item above) 

Components and parts containing toner and ink, 
including liquids, semi-liquids (gel/paste) and toner 

Include the cartridges, print heads, tubes, vent 
chambers, and service stations.       

Components and waste containing asbestos 

Components, parts and materials containing 
refractory ceramic fibers 

Summary of Contents for EliteDesk 800 G2 Desktop Mini














Reviews: