IBM PC 300PL, Установка

Страница: 96 / 112

Changing Settings and Exiting
In the Configuration/Setup Utility menus, you can accept the configuration changes
by viewing and saving the changes, or you can make manual changes and then save
the settings.
The following is a quick reference for identifying symbols in the
Configuration/Setup Utility program. For information on the function of keys, see
Using Your Personal Computer.
Ÿ
If a bullet (
Ÿ
) is beside a menu item, an additional menu is available.
Ÿ
Most information enclosed in brackets ([ ]) can be changed. You cannot change
information that is not surrounded by [ ].
Ÿ
If a right arrowhead (
5
) is beside a menu item, a configuration change occurred
in that category. The 5 might also appear in subsequent menus.
Ÿ
If an asterisk (*) is beside a menu item, a resource conflict is detected.
When you complete your changes or finish viewing information, return to the
Configuration/Setup Utility menu and select Save Settings to save the changes.
From this location, you can exit the Configuration/Setup Utility program.
To exit from theConfiguration/Setup Utility program, follow these steps:
1
From the Configuration/Setup Utility menu, press Esc.
2
The Exit Setup menu appears. You can save your changes, exit from the
Configuration/Setup Utility program without saving your changes, or return
to the Configuration/Setup Utility menu. Use the arrow keys to select the
desired option and press Enter.
82
Installing Options in Your Personal Computer
All manuals and user guides at all-guides.com
all-guides.com