IBM PC 300PL Types 6862, Инструкция по использованию

Страница: 53 / 146

Setting the Date and Time
Your computer has an internal clock that maintains the date and time. A battery
keeps the clock active when you turn off the computer.
To set the date and time:
1. Start the Configuration/Setup Utility program (see “Starting the
Configuration/Setup Utility Program” on page 34).
2. Select Date and Time from the Configuration/Setup Utility program menu.
3. Type the date and time in the appropriate fields.
4. Refer to “Exiting from the Configuration/Setup Utility Program” on page 37 for
instructions on saving your settings and exiting from the Configuration/Setup
Utility program.
Your operating system might also have a function for setting the date and time.
Refer to your operating system documentation for more information.
Changing Plug and Play Control Features
If you are installing a Plug and Play adapter or other device and experience
problems, you might need to change certain settings in Plug and Play Control in the
Configuration/Setup Utility program.
Note: If you experience any error message related to Plug and Play adapters or
devices, see “POST Message Charts” on page 67 for complete information on
solving the problem.
A setting that might affect the way a Plug and Play adapter behaves is the Address
Decode setting. Most Plug and Play adapters use 16-bit address decoding (this is
the default setting for Address Decode.). Some Plug and Play adapters have not
fully implemented this addressing scheme. If you are experiencing problems with a
Plug and Play adapter, changing the address decoding to 10-bit might fix the
problem. Conversely, if you are experiencing an 1852 error message, changing the
address decode setting to 16-bit might fix the problem.
Another setting that affects any type of Plug and Play device is the Plug and Play
Operating System setting. If you install a Plug and Play adapter or device and
experience a 185x error message, and your computer will be loading a Plug and
Play-compliant operating system, set this value to Yes.
Note: Check your operating system documentation to determine if it supports this
function.
Chapter 4. Configuring Your Computer.
39