IBM P 615 series, Руководство по обслуживанию

Страница: 202 / 491

Table 5. Firmware Error Codes. (continued)
Error Code Description Action/
Possible Failing FRU
21F2 0003 SCSI read/write optical - send diagnostic failed-
sense data available
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
21F2 0004 SCSI read/write optical - send diagnostic failed-
DevOfl cmd
Before replacing any system components, refer
to the notes in error code 21A0 0001.
Replace the SCSI device.
2200 0001 PCI Ethernet BNC/RJ-45 or PCI Ethernet
AUI/RJ-45 adapter
internal wrap test failure
Replace the adapter.
See “Checkpoint and Error Code Index” on page
162 for location code information related to this
error. Also see “Replacing the Network Adapter”
on page 161.
2200 1001 10/100 Mbps Ethernet PCI Adapter
internal wrap test failure
Replace the adapter.
See “Checkpoint and Error Code Index” on page
162 for location code information related to this
error. Also see “Replacing the Network Adapter”
on page 161.
2200 1002 10/100 Mbps Ethernet PCI adapter failure Replace the adapter.
See “Checkpoint and Error Code Index” on page
162 for location code information related to this
error. Also see “Replacing the Network Adapter”
on page 161.
2201 0001 PCI Auto LANstreamer token ring adapter failed
to complete hardware initialization.
Replace the adapter.
See “Checkpoint and Error Code Index” on page
162 for location code information related to this
error. Also see “Replacing the Network Adapter”
on page 161.
2201 1001 PCI token ring adapter failed to complete
hardware initialization.
Replace the adapter.
See “Checkpoint and Error Code Index” on page
162 for location code information related to this
error. Also see “Replacing the Network Adapter”
on page 161.
25A0 0001 Cache L2 controller failure Replace the CEC backplane assembly.
Location: U0.1-P1.
25A1 0001 Cache L2 SRAM failure Replace the CEC backplane,
Location: U0.1-P1-C1
25A8 0xxx Description: NVRAM problems
Action: Errors reported against NVRAM can be caused by low battery voltage and (more rarely)
power outages that occur during normal system usage. With the exception of the 25A80000 error,
these errors are warnings that the NVRAM data content had to be re-established and do not
require any FRU replacement unless the error is persistent. When one of these errors occurs, any
system customization (for example, boot device list) information has been lost, the system may
need to be reconfigured.
If the error is persistent, replace service processor
Location: U0.1-P1-X1
25A8 0000 Initialization failed, device test failed Refer to Action under error code 25A80xxx.
182
Eserver
pSeries 615 Service Guide