IBM NeXtScale System, Планирование и руководство по внедрению

Страница: 78 / 266

60
IBM NeXtScale System Planning and Implementation Guide
򐂰 4.10, “GPU and coprocessor adapters” on page 92
򐂰 4.11, “Embedded 1 Gb Ethernet controller” on page 96
򐂰 4.12, “PCI Express I/O adapters” on page 97
򐂰 4.13, “Integrated virtualization” on page 102
򐂰 4.14, “Local server management” on page 103
򐂰 4.15, “Remote server management” on page 105
򐂰 4.16, “External disk storage expansion” on page 107
򐂰 4.17, “Physical specifications” on page 110
򐂰 4.18, “Operating systems support” on page 112
4.1 Overview
The IBM NeXtScale nx360 M4 compute node contains only the essential
components in the base architecture to provide a cost-optimized platform. The
nx360 M4 compute node provides a dense, flexible solution with a low total cost
of ownership.
Figure 4-1 IBM NeXtScale nx360 M4 compute node
The nx360 M4 compute nodes fit into the IBM NeXtScale n1200 Enclosure that
provides common power and cooling resources. As shown in Figure 4-1, the
nx360 M4 compute node can support the following components:
򐂰 One or two Intel Xeon E5-2600 v2 series processors.
򐂰 Up to eight DIMMs of registered DDR3 ECC memory and operating up to
1866 MHz, which provides a total memory capacity of up to 128 GB.
򐂰 One on-board 1 Gb Ethernet port and one on-board 1 Gb
Ethernet/management port.